$Id: NEWSTUFF.html 108 2018-09-07 18:59:37Z coats $

What's New with the I/O API

Contents

Go to the I/O API Availability/Download/Installation page


Notes on netCDF-4

Starting with I/O API Version 3.1, the Makefiles are configured to use netCDF Version 4, which separates the Fortran library libnetcdff.a from the C library libnetcdf.a. To match this, the LIBS in the m3tools/Makefile uses -lnetcdff -lnetcdf. If you use these versions of netCDF, you must also modify build-systems for CMAQ, MCIP, SMOKE, and all your models that use netCDF similarly. If using a previous version of netCDF, you must modify m3tools/Makefiles to use just -lnetcdf.

Evidently, starting with netCDF-Fortran 4.4.2, UCAR in their wisdom decided to silently eliminate the

CALL NC*()
Fortran interfaces, e.g., CALL NCCLOS(CDFID, IERR), in terms of which the I/O API was originally implemented, in favor of the
IERR = NF_*()
forms introduced with netCDF-3. [If you can find any documentation on the web indicating that they were making this change I would enjoy seeing it; I can't find any.]

I/O API Version 3.2 was tediously re-coded to replace all 943 of these calls by the newer IERR=NF_*() Fortran calls that are still supported. Prior editions of the I/O API will have link errors with netCDF-Fortran 4.4.2 or later, because routines such as NCCLOS() are no longer in that library. An easy check to see if you are affected by this is to use the nm system-utility to see if NCCLOS is present. If the library works with 3.1 or earlier versions of the I/O API, you should see if you see a line with a "T" like the following (ignore the leading number-field); if it is missing, you will need I/O API-3.2 or later, or an older version of netCDF.

% nm libnetcdff.a | grep ncclos
0000000000001440 T ncclos_

Back to Contents


Bug-fix in m3tools/mtxcalc;
Clean-ups in MODULE MODGCTP.

There was a typo in the refined-grid definition for m3tools/mtxcalc that had the effect of "squashing" the output-range for the matrix that was calculated. Fixed.

Various clean-ups in I/O API MODULE MODGCTP, enhancing OpenMP parallelism, while these should have no impact upon the results.

Enhanced documentation for m3tools/m3combo—thanks, Uma Shankar! —and for available systems and libraries.

Back to Contents


Bug-fix to Makeinclude.*pg*

Jim Dew points out that in the Makeinclude.*pg* (the Makeinclude-files for PGI-compiler binary types), the use of double-quotes in the definition of make-variable MODI is not supported by GNU make, and creates compile-time errors.

It turns out that GNU make doesn't support backslash-escapes of a trailing blank either; however, use of single-quotes to force a trailing blank within that definition

MODI = '-module '
does work.

Note that the distinction of whether there is a trailing blank is necessary: the usual UNIX industry standard directive for module-search directives is

-Idirectory
and the Sun/Oracle variation is
-Mdirectory
with no space (a space would be a directive "delete all current module-search directives", which would subsequently be followed by new module-search directives). PGI wants
-module directory
with a space. And I need to define MODI so that sometimes has a trailing space, and sometimes not. The usual usages of either double-quotes to force the inclusion of a trailing blank or of escaping the trailing blank with a backslash (\) don't work for GNU make ;-(
Back to Contents


New routine INDEXL1() and new generic INDEXKEY()

New INTEGER*8-key lookup routine INDEXL1() and new generic interface INDEXKEY() in MODULE M3UTILIO:
    INTERFACE INDEXKEY

        INTEGER FUNCTION INDEX1( NAME, N, NLIST )
        CHARACTER*(*), INTENT(IN   ) :: NAME        !  Character string being searched for
        INTEGER      , INTENT(IN   ) :: N           !  Length of array to be searched
        CHARACTER*(*), INTENT(IN   ) :: NLIST(*)    !  array to be searched
        END FUNCTION INDEX1

        INTEGER FUNCTION INDEXINT1( IKEY, N, NLIST )
        INTEGER, INTENT(IN   ) :: IKEY        !  integer being searched for
        INTEGER, INTENT(IN   ) :: N           !  Length of array to be searched
        INTEGER, INTENT(IN   ) :: NLIST(*)    !  array to be searched
        END FUNCTION INDEXINT1

        INTEGER FUNCTION INDEXL1( LKEY, N, NLIST )
        INTEGER*8, INTENT(IN   ) :: LKEY        !  integer being searched for
        INTEGER,   INTENT(IN   ) :: N           !  Length of array to be searched
        INTEGER*8, INTENT(IN   ) :: NLIST(*)    !  array to be searched
        END FUNCTION INDEXL1

    END INTERFACE       !!  indexkey
    

Add more coordinate systems to m3tools/latlon

Back to Contents


Fixes to ioapi/rdatt3,wratt3 and m3tools/mtxcalc,mtxcple; web updates

Bug-fixes in ioapi/rdatt3 and ioapi/wratt3: fixed bug introduced by I/O API 3.2 PnetCDF changes.

Bug-fixes in m3tools/mtxcalc

Enhanced m3tools/mtxcple does not attempt to read/transform nonREAL variables.

Flag-fix in ioapi/Makeinclude.Linux2_x86_64g95dbg

Updated web-copies of OI/O API INCLUDE-files.

Back to Contents


Bug-fix to m3tools/mtxcalc; better flags for gfortran Makeincludes

Bug-fix in m3tools/mtxcalc: fixed uninitialized NUMER, DENOM variables.

Modified debug gfortran Makeincludes to use the latest (?) version of compile-flag for "trap uninitialized"

Back to Contents


Modified XY2XY() to pass-through "missing" location-arguments, for SMOKE.

Modified generic routine XY2XY() from MODULE MODGCTP to &pass-through location arguments: if X_IN<AMISS3 or X_IN<AMISS3 then after the call to XY2XY( ..., X_IN,Y_IN,X_OUT,Y_OUT), X_OUT=Y_OUT=BADVAL3<AMISS3.

Enhanced (cleaned-up) documentation.

Back to Contents


Enhanced m3tools program latlon
Changed default for environment variable IOAPI_OFFSET_64

For I/O API-3.2 post Dec. 25, 2017, m3tools program latlon now also writes M3DBLE (double-precision) Latitude-Longitude variables LATD and LOND, in addition to the original M3REAL (single-precision) variables LAT and LON. And since the I/O API features direct access by variable (date&time, and layer), this should not break any existing application.

Additionally, it is now possible to do interactive definition of grids with map projections of types

(as well as the original Lat-Lon (LATGRD3), Lambert Conformal Conic (LAMGRD3), and and UTM (UTMGRD3; grids may of course also be specified by a GRIDDESC file).

The default for environment variable IOAPI_OFFSET_64 is now TRUE. For netCDF 3.3 or later, this allows the size of file-timesteps to exceed 2 GB. (Assuming only (4-byte) REAL and INTEGER variables, a timestep in a GRIDDED file has size 4*NVARS*NCOLS*NROWS*NLAYS + 8*NVARS bytes.)

Back to Contents


Fixed bug reported by Ehsan Mosadegh in m3tools programs m3tshift and m3wndw.

Ehsan Mosadegh (dri.edu) reports a problem related to a missing EFLAG initialization in m3tools program m3tshift. This bug was also present in program m3wndw.

Now fixed.

Back to Contents


Bug-fix in UNGRIDB().

Jeff Vukovich (US EPA) reports a missing line
CU( 4,S ) = X * Y
in the I/O API-3.2 version of UNGRIDB().

Now fixed.

Back to Contents


MPAS INTEGER-variable support

INTEGER-variable support for m3tools program mpastom3: uses MPAS-cell values (as for MPCELLMATX(), below) instead of barycentric-linear interpolation.

INTEGER-variable support for MODMPASFIO generic routine MPINTERP(): uses MPAS-cell values (as for MPCELLMATX(), below) instead of barycentric-linear interpolation.

New "incidence-matrix" generic routine MPCELLMATX() returns the MPAS-cell subscripts for a set of points or 2-D grid of points.

Back to Contents


m3tools programs mpasdiff, mpasstat, mpastom3
MODMPASFIO generic routine MPINTERP(), MPBARYMATX(), MPBARYMAULT()

New m3tools programs:
mpasdiff
Compare two variables or layer-ranges of variables from one or two MPAS-format-netCDF files, using the standard list of differencing operations
mpasstat
Compute statistics (MEAN, SIGMA, MAX, MIN, and their locations), for a variable or layer-ranges of a variable from an MPAS-format-netCDF file.
mpastom3
Interpolate a set of variables from an MPAS-format-netCDF file for a specified time step sequence to a grid specified by an I/O API gridded Lat-Lon file, and write the result to a gridded I/O API file.

New MODMPASFIO generic routines

MPINTERP()
Interpolate MPAS-grid data to a Lat-Lon specified point, set of points, or 2-D grid of points, using barycentric-linear interpolation.
MPBARYMATX()
Return a 3-band matrix for doing barycentric-linear interpolation from MPAS-grid data to a set of points or 2-D grid of points
MPBARYMULT()
Multiply a 3-band matrix from MPBARYMATX() by a (layered or non-layered) MPAS-grid variable.

Back to Contents


Bug-fixes in programs VERTOT, VERTINTEGRAL

Bug reported by Kathy Brehme, Edward Anderson: incorrect default RUNLEN in m3tools program vertot. Same bug existed in vertintegral; bug fixed in both.

Enhanced default for RUNLEN in m3tools programs m3stat, m3tshift, m3wndw, m3xtract.

Enhanced Makeinclude.*: make-variables MODI, E132 for module-include path, 132-column-fixed source format.

Back to Contents


Add extra attributes to new MPAS-files, for VERDI

VERDI uses NCAR's Java MPASConvention.java for MPAS-file recognition. This code requires global file-attributes model_name and Conventions for file recognition. These attributes are nowhere mentioned in the MPAS file specification document.

MODULE MODMPASFIO routine CREATEMPAS() now puts these attributes into the file headers.

Back to Contents


Bug-fixes for MODULE MODMPASFIO

Bug-fixes for incorrect read of variables lonCell and write of kiteAreasOnVertex to/from file headers, in MODULE MODMPASFIO.

Back to Contents


Bug-fixes in EQMERC, SETEQM, SETTRM

EQMER() had an incorrect test for P_ALP

SETEQM, SETTRM had incorrectly-worded error messages.

Bug-fix in MODMPASFIO/ARC2MPAS().

Back to Contents


Bug-fixes for time stepped versions of read and write operations in MODULE MODMPASFIO and MODULE MODNCFIO

Subject says it: in both of these, there was a consistent error in values for the DELS() argument for the time step dimension.

Back to Contents


Bug-fixes in MODULE MODMPASFIO and log-message reductions for MODULE MODNCFIO

Bug in MODMPASFIO/MPSTR2DT() which then causes bad results from MODMPASFIO/READMPSTEPS().

Eliminate (annoyingly-numerous) "Processing coordinate transform" messages in MODULE MODNCFIO.

Back to Contents


Bug-fixes in MODULE MODNCFIO, MODULE MODMPASFIO , and m3tools program m3interp

Subject says it: bugs in time step versions of read/write routines; with time interpolation of BNDARY3 boundary condition data structures.

Thanks to Joey Huang for reporting the m3tools bug.

Back to Contents


MODULE MODNCFIO: add CREATENC(), WRITENCVAR(); bug-fixes

Bug-fixes for argument-mismatch in error-condition calls to NF_STRERROR().

Back to Contents


MODULE MODMPASFIO

MPAS is a (potentially-)global unstructured-grid weather model that can be adapted for atmospheric chemistry, land-surface modeling, and other tasks. It uses its own format built on top of netCDF to store and retrieve its model-data; the file structure is quite complicated.

New MODULE MODMPASFIO addresses some of the difficulties in dealing with this complexity. It provides parameters and state-variables for MPAS grid description, routines for creating, opening, describing, reading, and writing MPAS-netCDF files, as well as a number of grid related utility routines.

Since this netCDF-format is quite complex, this can save you from having to write several thousands of lines of code on your own. Additionally, it provides the data integrity facilities and error checking that are necessary to construct models of regulatory quality, for which the "chain of custody" for the model data must be kept in a form adequate for use in court.

Back to Contents


Timestep-read operations and bug-fixes in MODULE MODNCFIO

Added routines READNVSTEP*(FNAME,TSTEP,VNAME,...) for reading one time step (TSTEP=1,2,3,...) of the indicated variable from time-stepped "raw netCDF" file FNAME.

Bug-fixes in some of the READNCVAR4D*() routines (REAL case was OK; others had a typo).

Back to Contents


Bug fix in MODPDATA/SETUP_DECOMP() top-level Makefile.template

Transcription error in MODPDATA/SETUP_DECOMP() reported by David Wong, US EPA, now fixed.

Master Makefile.template had an inadvertent and backwards netCDF libraries definition; now corrected to

-lnetcdff -lnetcdf
reported by Xiangshang Li, Unkiversity of Houston.

Back to Contents


I/O API Snoop Mode

For I/O API 3.2 or later: If snoop mode is configured in the Makefile when you build libioapi.a, then environment variables SNOOPTRY3, SNOOPSECS3 control the number of re-tries and the delay between re-tries (secs) for reading data under end-of-file conditions.

This is useful, for example, when trying to "pipeline" processing for the models in a forecasting system.

Back to Contents


Support for INTEGER*1 and INTEGER*2 for REAQDNCVAR()

MODULE MODNCFIO had generic INTERFACE READNCVAR() augmented to support NF_BYTE==INTEGER*1 and NF_SHORT==INTEGER*2 variables.

Bug in library-order for m3tools/Makefiles, reported by Luís Carvalheiro, CESAM, Universidade de Aveiro. Fixed.

Back to Contents


New m3tools program M3MASK

m3tools program M3MASK reads ASCII mask-data, specified by a file having one line per column and row of the masked grid cells, and creates a GRIDDED output file with one INTEGER variable MASK for which

Back to Contents


4-D READNCVAR() routines in MODULE MODNCFIO

New routines READNCVAR4DD(), READNCVAR4DI(), READNCVAR4DR(), READNCVEC4DD(), READNCVEC4DI(), READNCVEC4DR() in the generic routine READNCVAR()

Bug-fixes (fixed bad dimension-check) for READNCVAR3DD(), READNCVAR3DI(), READNCVAR3DR(), READNCVEC3DD(), READNCVEC3DI(), READNCVEC3DR()

Back to Contents


Bug-fixes in LASTTIME(), RUNSPEC(), CKFILE3() routines

Missing IMPLICIT NONE and EXTERNAL declarations in LASTTIME().

Error in calculation of NRECS argumnent for RUNSPEC()

Bug-fixes by Edward Anderson, Lockheed Martin, for CKFILE3().

Back to Contents


Bug-fixes in DBLLIST(), INTLIST(), REALIST(), STRLIST() routines

Corrected mis-handling of delimiters in COMMA-or-BLANK delimited lists.

Back to Contents


Copy CMAQ metadata from input to output, for relevant m3tools programs.

Add new routines ISCMAQ() and ISSMOKE() to MODULE MODATTS3.

Copy CMAQ metadata from input to output, for m3tools programs, under control of environment variable COPY_META (default ISCMAQ(<input file>))

m3combo
m3cple
m3interp
m3tproc
m3tshift
m3wndw
m3xtract

Back to Contents


Don't compile single_thread.F if coupling mode not enabled

Edward Anderson (Lockheed Martin, supporting the U.S. EPA) points out that single_thread.o has unsatisfied references that are troublesome for the creation of shared libraries.

single_thread.F now compiles conditionally, with nonempty body only if IOAPICPL is defined. This source file is also commented out of the Makefile.nocpl*.

Back to Contents


Bug-fix for I/O API 3.2 m3tools program m3tproc

Chris Nolte, US EPA ORD, points out a bug in the I/O API 3.2 version of m3tools program m3tproc, together with a documentation problem and a m3tools/Makefile problem.
FIXED.

Back to Contents


More CMAQ metadata in MODULE MODATTS3

Metadata now contains values for all environment based control parameters, and path-names for input files.
Back to Contents


Bug-fixes for MPI/PnetCDF mode in MODULE MODATTS3

Subject says it.
Back to Contents


Fixes for Climatology-Year IO_365 Version

Bug-fix from Chris Nolte, US EPA, in SECSDIFF() for the Climatology-Year IO_365 Version. He also noted that the following C routines needed IO_365 support:
daymonc()
julianc()
mmddyyc()
secsdiffc
wkdayc()
Now complete.

The following Makeinclude-files were added, for building 360-day and 365-day Climatology Year versions of the I/O API, so that it will be easier to keep the Climatology-Year builds distinct from the (not-compatible) "normal" builds:

Makeinclude.Linux2_x86_64_360
Makeinclude.Linux2_x86_64_365
Makeinclude.Linux2_x86_64gfort_360
Makeinclude.Linux2_x86_64gfort_365
Makeinclude.Linux2_x86_64ifort_360
Makeinclude.Linux2_x86_64ifort_365
Makeinclude.Linux2_x86_64pg_360
Makeinclude.Linux2_x86_64pg_365
Back to Contents


"unstructured text-file" metadata in MODULE MODATTS3

MODULE MODATTS3 now has support for automated inclusion of "unstructured text-file" metadata into [P]netCDF file headers of all files newly-created by programs. Such files should be structured with 80-column lines; to have their contents copied into file-headers, you need to do the following command in the program-script
    setenv  IOAPI_TEXTMETA   <path-nanme>
    

If active, the text metadata can be found in the following MODULE-variables in MODULE MODATTS3

    LOGICAL,                   PUBLIC, PROTECTED, SAVE :: TEXTMETA          !!  text-file metadata active?
    INTEGER,                   PUBLIC, PROTECTED, SAVE :: TEXT_MLINES       !!  number of lines in TEXT_MDATA( :,: )
    CHARACTER*80, ALLOCATABLE, PUBLIC, PROTECTED, SAVE :: TEXT_MDATA( : )   !!  (TEXT_MLINES)
    

Back to Contents


Makeinclude changes for gfortran

gfortran documentation is less than clear; it turns out that -I should be used for F90 module search-path, whereas -J is used for F90 modulefile placement directory.

Note that PGI Fortran has strange and difficult rules for module search and module placement: -module works for both, but only the first such directive governs module placement.

Back to Contents


New m3tools program findwndw

New m3tools program findwndw to read headers from two GRIDDED files FILE1 and FILE2, and compute the smallest window into the FILE2 grid that completely encloses the grid for FILE1, if any. Program reports failure if the FILE2-grid does not completely cover the FILE1-grid.

Useful for tasks like finding the smallest window into a global Lat-Lon file (e.g. EDGAR emissions) that covers a Lambert based modeling grid, for subsequent use by m3tools program m3wndw.

Added Apr. 6, 2016: Mac OSX/gfortran/gcc support using ${BIN}=OSX_x86_gfortran; see file ioapi/Makeinclude.OSX_x86_gfortran.

Back to Contents


Compatibility fixes for I/O API 3.2; DOWNCASE()

B. H. Baek (UNC IE) discovered bacvkwards-compatibility problems in BILIN(), BMATVEC(), UNGRIDB(), and UNGRIDI() . for codes that do not USE M3UTILIO. Now fixed.

Added routine DOWNCASE( ASTRING ) to convert argument ASTRING to lower-case

.

Back to Contents


Bug fixes for I/O API 3.2 from Edward Anderson, Lockheed Martin.

Top-level Makefile.template
Fixes to treatment of make-variable BIN

ioapi/Makefile.*
Revised treatment of make fixed_src to fix initial creation of fixed-132 INCLUDE-files for CMAQ.

Multiple coupling-mode fixes.
in ddtvar3v.F, interp3v.F, intpqv.F

Multiple-definition issues
Stand-alone versions of LL2UTM() and UTM2LL()

Added March 9, 2016:
Need to add utm2ll.f to the fSRC list in the Makefiles; need to remove USE M3UTILIO from it to keep gfortran from claiming (falsely) a circular dependency.

Back to Contents


CMAQ metadata routines now implemented in MODULE MODATTS3

The following routines are now implemented and "active" in MODATTS3 MODATTS3:
INITCMAQ()
Initializes internal state variables holding CMAQ-standard metadata from either the standard-format text file with logical name IOAPI_CMAQMETA, from the program-environment if IOAPI_CMAQMETA=="ENV" or from the argument MDATA.

GETCMAQ()
Reads CMAQ-standard metadata from the header of file FNAME and puts it either into CMAQ-metadata object MDATA (if present) or into CMAQ-metadata module variable CMAQ_MDATA.

LOGCMAQ()
Writes CMAQ-standard metadata either from metadata-object MDATA (if present) or CMAQ-metadata module variable CMAQ_MDATA (otherwise) either to a structured-ASCII output file FNAME (if present) or to the program log

SETCMAQ()
Writes CMAQ-standard metadata either from metadata-object MDATA (if present) or CMAQ-metadata module variable CMAQ_MDATA (otherwise) to the header of the specified I/O API file

ENDCMAQ()
Turns off CMAQ-standard metadata

Back to Contents


New "raw netCDF" routines in MODULE MODNCFIO

Add new routines DESCNCVAR() and READNCVAR() to MODULE MODNCFIO:
DESCNCVAR( FNAME, MXVAR, NVARS, VNAMES, VTYPES, VNDIMS, VDIMS )
Returns lists giving the names, data-types, numbers of dimensions, and dimensions for the variables in the netCDF file with logical name FNAME

READNCVAR( FNAME, VNAME, NCOLS, [NROWS, [NLAYS,]] GRID )
Reads the specified 1-D, 2-D, or 3-D netCDF variable named VNAMEfrom the netCDF file with logical name FNAME (with dimension-checking).
Generic, for 1-D, 2-D, and 3-D variables of type {M3INT,M3REAL,M3DBLE}, and both fully-dimensioned and single-indexed output array GRID.

Back to Contents


New DBLLIST(); bug-fixes and support for blank-delimited lists in *LIST() routines

Add new routine DBLLIST() for REAL*8 valued lists, with support as part of the ENVLIST() generic.

Support for lists requiring more than 512 columns had a bug. Now fixed. These routines also now support blank-delimited lists.

New m3tools program gridprobe interpolates time series for a specified layer of a REAL variable to a specified set of Lat-Lon points from a GRIDDED input file, and write the resulting time series as columns to a human-readable ASCII REPORT-file.

Back to Contents


I/O API v3.2 m3tools programs wrfgriddesc and wrftom3

m3tools program wrfgriddesc creates a GRIDDESC file from the header-data in a WRF-format netCDF file.

m3tools program wrftom3 converts/extracts/windows variables from WRF-format netCDF files to GRIDDED I/O API files.

Back to Contents


I/O API v3.2 support for 360/365-day (no leap-year) climate modeling years

I/O API 3.2 has optional support for climate modeling with a 365-day/no-leap-year calendar with "normal" months, and weeks aligned so that Jan. 1, 1900 is a Monday. To build this version of the library, customize your ioapi/Makefile by adding -DIO_365=1 to the DEFINEFLAGS make-variable in it.

Note that since I/O API 3.0 in 2002, the I/O API has had optional support for climate modeling with a 360-day/30-day-month calendar, with weeks also aligned so that Jan. 1, 1900 is a Monday. To build this version of the library, customize your ioapi/Makefile by adding -DIO_360=1 to its DEFINEFLAGS.

Back to Contents


I/O API v3.2 Makefiles

Note that Makefiles always need to be customized for your system (installation-directory BASEDIR, etc.).

Starting with this release, these Makefiles will not be included in the release ioapi-3.2.tar.gz; for both of the directories ioapi and m3tools you will need to copy one of the Makefile.* templates to Makefile and customize it.

Back to Contents


I/O API v3.2-beta: Major Update.

Many thanks to George Delic, Ph.D., HiPERiSM Consulting LLC <http://www.hiperism.com/> for help getting a cleanly-working release out.

There are major changes for this release, some of which are documented elsewhere below. There are a number of additional changes, especially for CMAQ-5.1, netCDF-4, and for MS-Windows:

PnetCDF for CMAQ-5.1
CMAQ-5.1 can use PnetCDF for distributed-parallel I/O. Note that this is for gridded files only, with the fixed data-distribution specified for CMAQ. To activate pnetCDF distributed I/O for a particular file, you need the following kind of setenv statement in your run-script.
setenv <logical name> MPI:<path (physical) name>
The ioapi/Makefile.pncf and m3tools/Makefile.pncf may be used to create I/O API libraries with PnetCDF activated, or this feature may be turned on by un-commenting the compile-flag -DIOAPI_PNCF=1 in the Makefiles.

Related data- and processor-distribution state and routines are found in new MODULE MODPDATA. See this section on environment variables needed for using distributed-parallel I/O.

The original concept and the prototype code are due to Dr. David Wong, US EPA. This code has been extensively extended and revised, to meet the needs of proper I/O API integration and software engineering standards.

Changes for netCDF-4
The I/O API was originally implemented in the early 1990's, using the netCDF-2 NC*() Fortran interfaces. As noted elsewhere, netCDF-4 split apart the C interfaces, the Fortran interfaces, and the C++ interfaces into separate libraries (which each have their own versioning). Recent (post-4.4) versions of netCDF-Fortran have dropped the NC*() interfaces used; a major and tedious re-write was necessary to re-cast all 800+ NC*() calls in terms of netCDF-3-style NF_*() interfaces.

At the same time, support was added for 64-bit-integer variables (type M3INT8 = 10, provided that you are using netCDF-4 libraries. This feature may be turned on by un-commenting -DIOAPI_NCF4=1 in the Makefiles.

Cygwin under MS-Windows
The following Makeinclude files are now available, to build the I/O API using gcc and gfortran for MS-Windows under Cygwin:
Makeinclude.WIN_x86gfort
32-bit library/executables using Cygwin gcc and gfortran
Makeinclude.WIN_x86_64mingw64
64-bit library/executables using MingW-64 gcc and gfortran

Back to Contents


I/O API v3.2-beta: dependency-fixes; new m3tools program insertgrid

July 22, 2015:

For various C-language call reasons, there need to be standalone versions of LAMBERT() and LASTTIME()

New m3tools program insertgrid replaces the REAL variable-values from GRIDDED file FILE1 by values from GRIDDED file FILE2 for those FILE1-cells completely covered by FILE2, with re-scaling option. Default scaling assumes (non-MKS SMOKE: e.g., G/S/grid-cell) emissions units rather than (properly-mathematical MKS) flux units (e.g., W/m^2).

For I/O API version3.2-beta.

Back to Contents


Bug fix in ckfile3()

July 8, 2015:

Mogesh Naidoo reports failure of ckfile3() to support Equatorial Mercator projection (GDTYP3=EQMGRD3). This bug is also present for GDTYP3=TRMGRD3, ALBGRD3, LEQGRD3, SINUGRD3

Now corrected in all I/O API versions (3.0, 3.1, 3.2-beta).

Back to Contents


Fix in GCTP()for Intel ifort v-11 and later.

June 18, 2015:

Introduce new scratch variables in gctp.f so that INTENT works correctly for Intel ifort version 11 and later.

Back to Contents


More gfortran hacks; SINUGRD3 map projection

May 5, 2015:

Recent gfortran wasn't allowing certain USE M3UTILIO statements internally. Hacked the source to get it to where it will still work.

Added new parameter SINUGRD3 for Sinusoidal Equal Area map projection to PARMS3.EXT for I/O API versions 3.1 and 3.2., together with support for it in I/O API-3.2 MODULE MODGCTP

Back to Contents


New routine RUNSPEC()

March 2, 2015:
March 4, 2015:

SUBROUTINE RUNSPEC( FNAME, USEENV, SDATE, STIME, TSTEP, NRECS ) returns a time step sequence compatible with use of FNAME as an input file:

If FNAME is blank, default SDATE:STIME are from the wall-clock, and default TSTEP is 1 hour.

If FNAME is time independent, return SDATE=STIME=TSTEP=0, NRECS=1.

Else if USEENV, get SDATE, STIME, TSTEP, EDATE, ETIME from the environment and use them to calculate NRECS.

Else prompt the user for SDATE, STIME, TSTEP, EDATE, ETIME and use them to calculate NRECS.

Added March 4, 2015: Abhishek Bhat, PhD, EPI, of Trinity Consultants, points out a Makefile-bug: there needs to be a dependency line runspec.o: m3utilio.mod in the Makefile, similar to the already-present matxatts.o: m3utilio.mod dependency line.

Back to Contents


Standards-violation fixes in getyn(), getstr(), getreal(), getnum(), getmenu(), getdble(), promptmfile(), promptffile(), year4(), skipl()

Feb 23, 2015:

The Models-3 coding standards state:

  1. You will check status of systems-calls and other calls that may fail (e.g., netCDF and MPI calls) and return success/failure status; and
  2. You will write meaningful log messages adequate to locate and diagnose the error for the above, in cases of failures.
In all of the above I/O API routines, Marc Houyoux had written code which was in violation of those coding standards.

Now corrected.

Back to Contents


I/O API Version 3.2-beta

January 9, 2015 et seq:

Version 3.2 of the I/O API library code is available here for download in gzipped-tar source code form from the CMAS Center web-site, or is available on GitHub from <https://github.com/cjcoats/ioapi-3.2>. To install a distribution-copy from GitHub, go to the directory under which do the installation, and then do the command

    git clone https://github.com/cjcoats/ioapi-3.2
    
Note that some minor changes in calling code are required (mostly in USE statements, generally because of new INTERFACEs, or interfaces that moved from MODULE M3UTILIO to new MODULE MODGCTP or from version 3.1 and earlier MODULE MATXATTS to Version 3.2 MODULE MODATTS3.

To-Do List:

Back to Contents


Bug-Fixes in m3tools/projtool

Jan 15, 2015:
Jan 22, 2015:

Bug-fixes in m3tools program projtool:

Now fixed.

Back to Contents


Bug-Fix in m3tools/projtool

Dec 19, 2014:

Bug-fix in m3tools program projtool: for grid-corner calculations, the NW and SE corners were labelled backwards. Now fixed.

Back to Contents


Enhanced m3tools/m3diff

August 28, 2014:

New version of m3tools program m3diff now supports dimensions having up to 9 digits, with variable-format spacing as needed. This will be useful for comparing SMOKE vector-files (which use degenerate grids with NCOLS=NLAYS=1 and NROWS=<number of sources>) that have large (>99,999) numbers of sources.

Back to Contents


Bug-fix in m3tools/projtool: defining projections by angles.

August 14, 2014:

John McHenry, BAMS, found a bug in the algorithm that m3tools program projtool uses to define input and output map projections by angles. Now fixed.

Back to Contents


INTEGER(8)-key search and sort routines.

August 6, 2014:

New INTEGER*8-keytuple search and sort routines FINDL1(), FINDL2(), FINDL3(), FINDL4(), LOCATL1(), LOCATL2(), LOCATL3(), LOCATL4(), and SORTL1(), SORTL2(), SORTL3(), SORTL4() and their C counterparts qsortl1(), qsortl2(), qsortl3(), and qsortl4() were added, together with the inclusion of these routines into generic INTERFACEs FINDKEY(), LOCATE(), and SORTI() in MODULE M3UTILIO.

Back to Contents


Bugfix in m3tools program m3diff

July 9, 2014:

Mohammad Omary, UNC IE, turned up a bug in using m3tools program m3diff on files with distinct time step sequences (e.g. comparing file A for July 2009 with File B for August 2014. This is fixed in the new version.

Back to Contents


Additional SORTI*C* routines

June 12, 2014:

There are now the following additional sort-by-string-table routines, covered by the MODULE M3UTILIO SORTI() generic interface:

SORTINC4( N, M, INDX(N), CTABLE(N) )
arguments INTEGER N, M, INDX(N); CHARACTER(*) CTABLE(N)
Indirect-sort by CTABLE, assuming that only the first M characters in each table-entry are significant.

SORTINC8( N8, M8, INDX8(N8), CTABLE(N8) )
arguments INTEGER(8) N8, M8, INDX8(N8); CHARACTER(*) CTABLE(N8)
Indirect-sort by CTABLE, assuming that only the first M8 characters in each table-entry are significant.

Back to Contents


Generic INTERFACEs in MODULE M3UTILIO

March 19, 2014:

Environment-buffer maximum size expanded to 64K-1 (=65535) for environment-variable routines ENVLIST,ENVDBLE, ENVINT, ENVREAL, ENVSTR, ENVYN, INTLIST, REALIST, STRLIST

MODULE M3UTILIO now has generic interfaces for the following:

ENVLIST
INTLIST, REALIST, STRLIST

FINDKEY
FINDC, FIND1, FIND2, FIND3, FIND4, FINDR1, FINDR2, FINDR3, FINDR4

LOCATE
LOCAT1, LOCAT2, LOCAT3, LOCAT4, LOCATC, LOCATR1, LOCATR2, LOCATR3, LOCATR4

SORTI
SORTIC4, SORTIC8, SORTI1, SORTI2, SORTI3, SORTI4, SORTR1,SORTR2, SORTR3, SORTR4

New m3tools programs designed to aid scripting, driven by command-line date and time arguments:

Back to Contents


Bugfix in m3tools program m3merge

January 17, 2014:

John N. McHenry, BAMS, turned up a bug in using m3tools program m3merge on time independent files. This is fixed in the new version.

Back to Contents


Changes to deal with gfortran standards-incompatibilities.

December 18, 2013:

Recent versions of gfortran insist on breaking compatibility with all other compilers we use, not accepting command-line-argument routines IARGC() and GETARG() (which are an industry standard Fortran extension), and accepting only Fortran-2003 routines GET_COMMAND_ARGUMENT() and GETARG().

This version conditionally implements IARGC() and GETARG() in init3.F, depending upon preprocessor-definition -DNEED_ARGS=1 which is now set in Makeinclude.Linux2_x86, Makeinclude.Linux2_x86gfort, Makeinclude.Linux2_x86_64, and Makeinclude.Linux2_x86_64gfort

Back to Contents


OpenMP parallel for programs M3AGMASK, M3AGMAX, M3COMBO, M3TPROC

November 21, 2013:

In addition to the previously OpenMP parallel program VERINTEGRAL, programs M3AGMASK, M3AGMAX, M3COMBO, M3TPROC are now OpenMP parallel.

Environment variable OMP_NUM_THREADS controls how many parallel threads/processors are used for program execution. Note that for the most part, these programs do a lot of I/O, so that running with two threads may help performance, especially for large grids, but OMP_NUM_THREADS > 2 has severely diminishing returns for these particular programs.

Back to Contents


New SUBROUTINE LASTTIME() and its use for applications in m3tools; larger environment-buffer size

November 5, 2013:

New routine LASTTIME(SDATE,STIME,TSTEP,NSTEPS,EDATE,ETIME) returns the ending date&time for time step sequence SDATE:STIME:TSTEP:NSTEPS. Safe for very long time step sequences (even multi-century!). Now used in new versions of m3tools programs m3combo, m3cple, m3interp, m3tproc, mtxblend, and mtxcple.

Internal environment buffer in subroutines SETENVVAR(), ENVYN(), ENVINT(), ENVREAL(), ENVDBLE(), INTLIST(), STRLIST(), and REALIST(), expanded from 512 bytes to 64K bytes, to support larger environments as necessary.

Back to Contents


Bug-fix for m3tools/m3combo from Bonyoung Koo, Environ.

December 13, 2012:

Bonyoung Koo, Environ, found a set of bugs in m3tools/m3combo associated with the use of this tool for CUSTOM and BOUNDARY files. This bug is now fixed in both I/O API versions 3.0 and 3.1.

Back to Contents


Bug-fix for m3tools/m3xtract and m3tools/vertintegral.

November 15, 2012:

Sarika Kulkarni, California ARB, found bugs in programs m3tools/m3xtract and m3tools/vertintegral and provided fixes for them. The m3tools/vertintegral bug is present only in Version 3.1 of the I/O API. These fixes are now in the distribution.

Back to Contents


Enhancement and bug-fix for m3tools/projtool.

October 30, 2012:

For operation-cases 10, 11 (display input-grid corners or centers relative to output coordinate system, there was a bug: the NW corner was calculated but not reported to the user.

Additional operation 12: report output-grid column and row for input-projection location <X,y>.

Back to Contents


Bug-fix for INQATT3().

October 2, 2012:

Title says it... This was a long standing bug, which (I guess) shows how no one is using extra M3IO attributes ;-(

Back to Contents


Bug-fix from Sarika Kulkarni, CA ARB, in m3xtract; new address info for m3tools programs.

September 18, 2012:

Sarika Kulkarni, CA ARB, provided a bug-fix to the I/O API Version 3.1 m3xtract; this is now incorporated into the release.

The primary I/O API author, Carlie Coats, has performed "musical offices" again, and is now at

Carlie J. Coats, Jr. , Ph.D. carlie@jyarborough.com
UNC Institute for the Environment
137 E. Franklin St. Suite 602 Room 613-C / Campus Box 1105
Chapel Hill, NC 27599-1105
This new address is now incorporated into m3tools splash screens, replacing the older one(s).

Back to Contents


relocation error link issues for x86_64, and new BIN=Linux2_x86_64ifort_medium

October 26, 2011:

There are issues with huge arrays and COMMON blocks on x86_64 Linux (and other) platforms; these show up at link time with error messages talking about relocation errors. New BIN=Linux2_x86_64ifort_medium is designed to deal with these situations; see this note for details.

Back to Contents


Version 3.1 m3tools/Makefiles now assume netCDF Version>4.1 Library Changes

October 21, 2011:

Starting with netCDF Version 4.1, linking with netCDF now requires additional libraries. As of today's downloads, I/O API Version 3.1 m3tools/Makefiles now assume at least the minimal set. See this note about netCDF.

Note that this incompatibility from netCDF will also affect all other model-builds using netCDF Version 4.1 or later.

Back to Contents


Bug-fix in m3tools program VERTINTEGRAL

August 31, 2011:

Rajesh J points out a problem with OpenMP directives in m3tools program VERTINTEGRAL. Now fixed in both the Version 3.0 and 3.1 tarballs.

Back to Contents


Bug-fixes in SUBROUTINE CURREC()

August 29, 2011:

Rajesh J points out a problem with the Version 3.0 currec.F (extraneous lines beginning with #, possibly inserted by the version control system). On comparison with the Version 3.1 code, it turns out that a bug-fix suggested by Christian Hogrefe was dropped from this version. Both are now fixed.

Back to Contents


Fixes from Christian Hogrefe in programs JULDATE and M3XTRACT

June 8, 2011:

Christian Hogrefe points out that gfortran regards IARGC() as a Fortran INTRINSIC rather than as an EXTERNAL, and PROGRAM JULDATE needs to be modified accordingly

He also found a bug in PROGRAM M3XTRACT and provided a fix.

Back to Contents


Bug-fix for file type CUSTOM3 in PROGRAM M3STAT

May 26, 2011:

There was a problem for single-variable analysis of multi-layer files of type CUSTOM3, now fixed.

Back to Contents


Bug-fixes and format improvements in m3tools program PROJTOOL

May 5, 2011:

There were menu-problems and format-readability problems, now fixed.

Back to Contents


Add interface-block for CRLF() to MODULE M3UTILIO

April 25, 2011:

At the request of US EPA, an interface block for routine CRLF() was added to MODULE M3UTILIO for use in the upcoming version of CMAQ. This may necessitate code changes for codes that already USE M3UTILIO and that use that routine (just delete the declaration and the EXTERNAL statement that accompanies it).

Back to Contents


Code re-organization to support full strength DESC3() for BUFFERED files

April 19, 2011:

At the request of US EPA, full strength DESC3() for BUFFERED files was added, for use in the upcoming version of CMAQ. To see whether the library is built on this code-version, IF(.NOT.CHKBUF3()) STOP : you get a link-failure with previous editions of the library.

Back to Contents


Bug-fix in error-formats from Matthew Turner, University of Colorado at Boulder.

April 15, 2011:

Matthew Turner of UC-Boulder points out that error formats in functions CKDESC3() and CKFILE3() have too narrow a field for the variable-count which may occur. This is now fixed in both Versions 3.0 and 3.1.

Back to Contents


I/O API Version 3.1: 64-bit record support; gfortran support

August 10, 2010:

Support is now optionally available for "large" time-step records (total timestep extent, including all variables, exceeds 2GB). This I/O API requires netCDF version at least 3.6. The option is controlled by a new environment variable:
setenv IOAPI_OFFSET_64 < YES | NO > [NO]
"YES" enables netCDF NF_64BIT_OFFSET mode for newly-created files. The default for this environment variable is "NO" since few applications require more than 2GB of array space for a single timestep. Note that applications compiled with pre-3.6 versions of netCDF (e.g., downloaded PAVE) will not be able to open and access these large-record files.

For compile-types that use gfortran (BIN=Linux2_x86_64 and BIN=Linux2_x86_64), there is a change to the Makeinclude files: make-variable OMPLIBS is now -lgomp. Notes:

Back to Contents


I/O API Version 3.1 Beta 1

March 15, 2010:

The first beta-release version of I/O API Version 3.1 is now available.

This is a "Jubilee-Day" release:

This version is source-code compatible with previous versions; however, you should not mix INCLUDE nor object files between the two versions.
Because of data-structure-dimension changes, new and old versions are not link compatible. You will need to re-build programs that use the I/O API.

Files written with previous versions should still be readable by programs built with the new version.

Files written by the new version may not be readable by programs compiled/linked with the old version, if either they take advantage of the increased MXVARS3 or large timestep-record features.

Changes for Version 3.1 are:

Back to Contents


Bug fix: Transverse and Equatorial Mercator output projections in m3toolsprogram MTXCALC

February 19, 2010:

Dr. Steve Yim, Department of Engineering, University of Cambridge, UK, discovered a bug in m3tools program mtxcalc treatment of Transverse Mercator outpout projections. Same bug was present for Equatorial Mercator output.

Now fixed.

Back to Contents


Bug fix: declaration of IOPARMS3() in iodecl3.h

February 9, 2010:

David Borlund, UNC, discovered a C-language link problem which traced down to a bad declaration of IOPARMS3() in C include-file iodecl3.h.

Now fixed.

Back to Contents


NetCDF flag-changes from Martin Otte, US EPA, for netCDF4 compatibility; bug fix in m3tools program PROJTOOL.

October 28, 2009:

Martin Otte of US EPA reports that netCDF Version 4 expects somewhat different flags for file-opening and file-creation than previous versions: in particular, for creating files the "open for write" flag which was required for netCDF v2 and optional for v3 must not be present for v4. Similarly for the "no-clobber" flag for opening pre-existing files.

m3tools program PROJTOOL had bad argument types to GETDBLE() in the UTM-coordinate case. Now fixed.

Back to Contents


New program VERTINTEGRAL for computing CONC-file species vertical column totals; various fixes.

October 26, 2009:

Frank Binkowski and Zac Adelman of the UNC Institute for the Environment, with help from Carlie Coats, BAMS, developed program VERTINTEGRAL for computing vertical column totals of gas-phase chemistry and mass-mode aerosol species from CMAQ conc-files, writing the result to a one-layer gridded M3IO output file. This program is OpenMP parallel, and is structured for efficiency on microprocessor based (shared memory parallel) systems.

Also there are a variety of minor enhancements to I/O API routines STR2DBLE(), CHECK3(), INQATT3(), and READ3(), a bug-fix to CURREC() affecting time periods longer than five years, and minor enhancements to various m3tools programs.

Back to Contents


Bug-fixes in MATXATTS() and M3CPLE

July 1, 2009:

Angel Rodrigues Lopezof rai.usc.es found a bug in program M3CPLE's false-Easting/Northing treatment for UTM coordinates.

Also there was an attribute-type bug in routine MATXATTS()

Both are now fixed.

Back to Contents


Bug-fix in function STR2DBLE()

May 15, 2009:

B.H. Baek, Ph.D., of the Institute for the Environment at UNC-CH found a bug in the internals of function STR2DBLE(). Now fixed.

Back to Contents


Bug-fix in subroutine INQATT3()

April 30, 2009:

Fixed an argument-list mismatch in a netCDF call inside subroutine INQATT3()

Back to Contents


Bug-fix in M3COMBO

March 9, 2009:

Dr. M. Talat Odman, of the School of Civil & Environmental Engineering at Georgia Institute of Technology points out a bug in the consistency-checking code for m3tools program M3COMBO.

Back to Contents


pgf90/gcc issues

February 24, 2009:

Current versions of the gcc compiler system have changed the Fortran name-mangling style, and I've changed the Makeinclude.Linux*pg_gcc* files to match. The old-version flags are present but commented out in these files if you need the older behavior.

Back to Contents


Makefile issues

December 29, 2008:

Neil Davis (UNC) reported some further problems with the Makefiles, and then helped with diagnosing, fixing, and validation.

Back to Contents


New MODULE MTXATTS; Makefiles now default to compiling with a f90 compiler.

December 23, 2008:

As pointed out by David Wong, the Nov. 28 fix to m3tools program MTXCALC brought in a new version from the experimental branch that uses new MODULE MTXATTS. This caused Makefile problems.

MODULE MTXATTS is intended to allow much more complete integrity checking for programs that use grid/map transformation-matrix files. It provides new routines for storing and retrieving the grid description parameters for both the input and the output grid for the matrix stored in the file:

SETMTXATT
set or check input or output grid description attributes from arguments for matrix-files: if file is NEW, set the attributes; else check them.

GETMTXATT
get input or output grid description attributes for existing matrix-files and return as arguments

CHKMTXATT
check input or output grid description attributes for existing matrix-files against attributes from the argument list

and new PARAMETERs INGRD3 and OUTGRD3 to discriminate between a matrix's input-grid and its output-grid in the above routines.

Correspondingly, the default Makefiles have been modified so that they always build the MODULEs MTXATTS and M3UTILIO and include them in the library. That means the default builds require a Fortran-90 compliant compiler (which is needed for the most common I/O API clients, CMAQ, SMOKE, and MCIP, anyway). For those requiring a FORTRAN-77-only build, the old Makefiles have been renamed with a .f77only suffix; just copy the required variant to Makefile and proceed as before.

Makeinclude.${BIN} files have not been changed for reasons of maintaining compatibility with existing directory-setups, etc. This means, for example, you can expect problems with the default Makefiles and such machine/compiler types that assume a FORTRAN-77-only such as the g77 assumed by ${BIN}=Linux2_x86.

Back to Contents


Fix for WMO-screwup Longitude conventions in programs M3CPLE and MTXCALC

November 28, 2008:

It turns out that the WMO has invented a "standard" that conflicts with ISO Standard 6709 (and centuries of common usage), by which—according to WMO—longitudes should be always positive, and North America has longitude range something like +200 to +300. We have encountered (obscure, hard-to-expect, hard-to-diagnose) problems dealing with data following these conventions, and have therefore implemented heuristics to deal with this in m3tools programs M3CPLE MTXCALC.

Back to Contents


Add support for new map projections in ckdesc3()

July 29, 2008:

Neil Davis (UNC) reports lack of support for map projection type EQMGRD3 in ckdesc3(). Iurns out that TRMGRD3, ALBGRD3, LEQGRD3 weren't supported either, by oversight (many codes don't use this file-header-checker when creating new files...).

Now implemented, together with comments in FDESC3.EXT indicating the conventions for defining map projections of types ALBGRD3, LEQGRD3.

Back to Contents


Bug-Fix in m3tools/Makefile.nocpl

July 29, 2008:

Neil Davis (UNC) reports a bug in m3tools/Makefile.nocpl, together with the required fix. Now implemented.

Back to Contents


Bug-Fixes for Albers

July 10, 2008:

In ALBERS() and LL2ALB() in the experimental Albers Equal-Area Conic map projection support: internal map-projection parameters were not being maintained correctly.

Back to Contents


Experimental Albers Equal-Area Conic map projection support
MM5 and WRF spheres added to GCTP() and SETSPHERE() by Steve Howard, NOAA/ASMD
Bug-fix to dayagg, for a problem reported by Alexandros Syrakos.

June 16, 2008:

INCLUDE files PARMS3.EXT and parms3.h have new token-values
ALBGRD3
Albers Equal Area Conic map projection
LEQGRD3
Lambert Azimuthal Equal Areq map projection
and beta-test partial Albers-projection support has been added to I/O API subroutine LAMBERT, in new entries ALBERS(), SETALB(), ALB2LL() and LL2ALB(), and to m3tools programs LATLON, PROJTOOL, M3CPLE, MTXCALC, and M3FAKE.

Steve Howard, NOAA Atmospheric Sciences Modeling Division, added two additional sphere-types to I/O API subroutines GCTP() and SETSPHERE():

Type 20
normal sphere with R_Earth=6370000 meters, matching default MM5 and WRF-ARW.
Type 21
normal sphere with R_Earth=6371200 meters, matching default WRF-NMM.
There are consequent changes to m3tools program M3CPLE.

Alexandros Syrakos reported a bug in m3tools program DAYAGG: output starting date should be 1000*(YEAR==0)+(DAY==1) = 1 (instead of 0), in order for repeated applications to work.

Back to Contents


Bug-fix to m3combo, from Bonyoung Koo, ENVIRON International Corporation.

May 9, 2008:

Bonyoung Koo reported a further bug in m3combo, that happens with relatively long variable-names (not found in my test case), and suggested exactly what the fix needed to be. Thanks!

Also, minor fixes in m3cple: default INSPHERE value, eliminate (invalid) resolution warning for Cartesian-to-Lat/lon coordinate transformations.

Back to Contents


Multi-decade support; some Mac OS10 support; netCDF 3.6.2 warning.

February 15, 2008:

Debra Baker of the University of Maryland has put in some extensive work figuring out how Mac OS-X (and generally Carnegie-Mellon Mach-descended) linker symbols work, resulting in a gfortran build for Macs; the new Makeinclude file is Makeinclude.OSX_x86. Scott N. Spak of the Center for Sustainability and the Global Environment at the University of Wisconsin-Madison provides an Intel/Gnu ifort/gcc configuration which may now be found in Makeinclude.OSX_x86_64ifort.

Evidently, all of the compilers on Mach-based operating systems generate linker-symbols with prefixed underscores, unlike UNIX systems which take the C-language names verbatim (so that C "void foo" becomes linker symbol "_foo" instead of "foo", for example.) This is highly confusing to traditional Unix users of the nm linker-symbol utility;-( Other Mac compilers should behave similarly to these two. [Send me more working variations, and I will include them in the distribution and credit you for them...]

Debra also reports that when you build netCDF version 3.6.2 and higher, you should be careful not to use the --enable-shared flag, because it excludes Fortran symbols from the resulting libnetcdf.a.

Christian Hogrefe of the New York DEQ pointed out (and diagnosed!) problems with integer-overflow in the internal record-calculation routines which he found for multi-decade runs, and then participated in fixing and testing the improved versions, which should be OK (but maybe slow) for even multi-millenium runs.

Back to Contents


Bug-fix in ISDSTIME()

December 19, 2007:

Prakash Doraiswamy reports a bug in 2007-and-later start of daylight savings time. Now fixed.

Also: format-bug fix in SYNC3(); Makeinclude for binary type Linux2_x86path (32-bit PathScale Fortran).

Back to Contents


Bug-fix in worker routine chkfil3()

November 29, 2007:

A bug was introduced into CHKFIL() to support same-set/different-order variables-lists (at someone's request; I don't recall who). This is bogus. Revert to reqiring variable lists have the same order.

Back to Contents


Makeinclude improvements

November 15, 2007:

Improvements to Makeinclude files for Linux2_x86ifcdbg, Linux2_x86_64ifortdbg, Linux2_x86_64ifort, Linux2_ia64ifortdbg, Linux2_x86_64sun, Linux2_x86_64path, to better support current compilers -- particularly Intel version 10.x.

Improved error-checking in WRITE3(), CHKFIL().

Back to Contents


Linux x86_64 Makeinclude support for PGI compilers

May 30, 2007:

Prakash Doraiswamy, Atmospheric Sciences Research Center, SUNY Albany and New York State Department of Environmental Conservation, and Winston Hao, New York State Department of Environmental Conservation, provided flag-sets that they use with their 64-bit Opteron cluster. These may be found in the new release's Makeinclude.Linux2_x86_64pg_pgcc_nomp and imply that the user has compiled libnetcdf.a with PGI pgcc; for GNU gcc-compiled libnetcdf.a, a companion but untested flag-set is in Makeinclude.Linux2_x86_64pg_gcc_nomp.

They report that they successfully built libnetcdf.a with the following flags:

setenv CC pgcc setenv CXX pgcCC setenv FC pgf90 setenv F90 pgf90 setenv CFLAGS "-O2 -Msignextend -V" setenv CPPFLAGS "-DNDEBUG -DpgiFortran" setenv FFLAGS "-O2 -w -V"
following this advice from the PGI website.

Back to Contents


Bug-fix/enhancement from Bonyoung Koo, Environ, to m3tools program M3COMBO; fix to CKDESC3() for boundary files

May 17, 2007:

Bonyoung Koo, ENVIRON International Corporation, found a problem situation in M3COMBO, where one wanted to use variables from distinct files but having the same names to build the combinations, and provided a new version of the code with an ingenious way of handling this problem, as well as with bug-fixes dealing with defaults for time step sequence issues.

Michael Bane, U Manchester, UK), found a problem with internal routine CKDESC3() for "box-model" test cases (BugZilla Bug 2355), where boundary files could not exist for 1x1 box-models. This is now fixed (although the fix now permits very thick boundaries in some cases).

Back to Contents


Fixes to m3tools programs M3COMBO and M3TPROC

Febuary 21, 2007:

George Pouliot, US EPA, found a bug in the "all variables" initialization for program MTXCALC and provided a fix.

Jerry Condrey, Baron Advanced Met Systems, found an inconsistent initialization in program M3COMBO and provided a fix.

Back to Contents


#include <stdlib.h> in getdttime()

Febuary 12, 2007:

As pointed out by Dr. Frank Binkowski, gcc versions 4.x generated a warning about the call to exit() in getdttime(). This is alleviated by adding a reference to stdlib.h.

Back to Contents


Sun compilers:s Bug-fix in program M3COMBO

Febuary 5, 2007:

Sun Studio Express compilers for Solaris and Linux are now available at no charge for both commercial and noncommercial use from http://developers.sun.com/sunstudio/index.jsp. I/O API support has been added for using these compilers under Linux in both 32-bit and 64-bit modes, with corresponding binary types Linux2_x86_64sun and Linux2_x86sun.
This is new stuff, and should be considered "beta" at this time.

Fix in program M3COMBO for a bug that was evidently introduced in the April 26, 2006 release.

Back to Contents


Daylight savings time; program M3STAT; negative JDATEs

January 29, 2007:

Fix in JSTEP3() for a bug that was introduced in the "standard-year" set of mods.

Back to Contents


Daylight savings time; program M3STAT; negative JDATEs

January 25, 2007:

Subroutine ISDSTIME has been enhanced so that it supports daylight savings time determination for years both 2006 and earlier, and 2007 and later (where note that the US Congress changed the starting and ending times effective year 2007).

M3STAT had a bug in processing files of type BNDARY3. This has now been corrected.

There were bugs in time-handling for dates with negative year component. Such dates are required for INTERP3() usage with Standard-Year and Standard-Week files. Affected routines are

Note that PAVE has a bug in constructing legends for files with SDATE3D < 0

Back to Contents


Corrected bug bug in program MTXCALC

December 12, 2006:

MTXCALC had a map projection-types array that incorrectly swapped Equatorial Mercator and Transverse Mercator, as reported by A. Fraser of ic.ac.uk. This has now been corrected.

Back to Contents


Corrected Splash-Screen bug in INIT3

October 5, 2006:

INIT3 incorrectly generated double-copies of the opening splash screen under some circumstances. Thanks to John McHenry for noting this issue.

Back to Contents


Corrected Makeinclude.Linux2_x86pg_gcc_mp and Makeinclude.Linux2_x86pg_gcc_nomp

September 13, 2006:

gcc and its flags were not being set correctly. Thanks to NOAA/ASMD for noting this change.

Back to Contents


m3tools program M3CPLE Enhancement

September 7, 2006:

m3tools program M3CPLE now accepts environment variable IOAPI_ISPH to control what geodetic spheroid is used for grid-to-grid interpolation operations. The default is still the GRS-80 spheroid that previously was hard-coded in the program.

Back to Contents


C/Fortran interface utilities; MMDDYY() bug-fix

September 1, 2006:

Fortran::C string conversion routines fstr2cstr(), name2cstr(), cstr2fstr() for C programmers were promoted from private (internal-only) to public (callable as part of the I/O API library.

Subroutine MMDDYY() was modified so that it handles year-argument zero correctly (needed for SMOKE-RT for WRF).

Back to Contents


Warning-message format fix in CKDESC3()

June 11, 2006:

Tanya Otte, US EPA, notes that internal I/O API worker routine CKDESC3() had a bad warning-message format. This bug is now corrected.

Back to Contents


Added WRF vertical coordinate support to worker routine CKFILE3()

June 7, 2006:

Tanya Otte, US EPA, notes that internal I/O API worker routine CKFILE3() did not support the WRF vertical coordinate types. Support was added for both WRF vertical coordinats types. Upon further examination, CKDESC3() did not support WRF-NMM; this support was also added, and the routine was restructured for greater simplicity.

Back to Contents


Added INTERFACE block for GTPZ0() in m3utilio.f; corrected legend in utmtool

May 16, 2006:

MDOULE M3UTILIO now supports interface checking for USGS-derived routine GTPZ0().

"Lower-Right" and "Upper-Left" legends were swapped for the grid-corner modes (40,41,42,43) of utmtool (although you could have figured out what you wanted from the accompanying <X,Y>::<LAT,LON> values).

Also comment-correction related to vertical grid types by Jerry Condrey in routine GRDCHK3() (no code-changes).

Back to Contents


Support for WRF EM vertical coordinate type VGWRFEM in CKDESC3()

May 8, 2006:

Tanya Otte, US EPA, notes that internal I/O API worker routine CKDESC3() did not support the WRF EM vertical coordinate type VGWRFEM defined in post-May-2005 versions of INCLUDE-file PARMS3.EXT. This bug is now corrected.

Back to Contents


New multiple-input file version of program M3COMBO; bug-fix in M3COMBO, M3DIFF

April 26, 2006:

There is a new version of "m3tools" program M3COMBO that can use variables from multiple input files (rather than from a single input file) in constructing its linear-combination output variables. The program even supports mixing time independent and time stepped input files.

Additionally, a minor bug in the specification of starting time for runs of programs M3COMBO and M3DIFF has been fixed (previously, if the input file started at date&time 2006116:120000, for example, the program would not allow you to start a run at 2006117:000000, since it thought 000000 was "before" 120000 in all cases.

Because of the complexities in specifying linear combinations of variables from multiple input files, the new multi-file-input version of M3COMBO is not script compatible with the preceeding version.

Back to Contents


state3.h storage-order error for IOAPI_CSTATE3

March 31, 2006:

David Wong points out that versn had been inserted into the wrong storage location in the IOAPI_CSTATE3 typedef in C include-file state3.h. This is now fixed.

Back to Contents


PGI "save" flag fix

March 8, 2006:

The FSFLAG in the Makeinclude.*pg* has been fixed. This is used to enforce default SAVE for variables in USGS routine GCTP. If not present, this can potentially cause geospatial transform results to be flaky.

Back to Contents


Another M3DIFF bug-fix

February 17, 2006:

As pointed out by Matthew Johnson of the Iowa DNR - Air Quality Bureau, in the January 27 bug-fix, an additional typo crept into program M3DIFF at line 560 -- an extra inadvertent
IF ( VARMODE ) THEN
crept into the code. This has now been fixed.

Back to Contents


M3DIFF bug-fix

January 27, 2006:

Program M3DIFF had an output time step sequence at about lines 653-735, as pointed out by Dr. Christian Hogrefe of the State of New York, who also suggested the correct fix.

Back to Contents


MTXCALC bug-fix

January 11, 2006:

Program MTXCALC had an off-by-one-half error at about line 732, as pointed out by Dr. Michael Bane of the University of Manchester (UK), that is now fixed. Also one interface-block fix in MODULE M3UTILIO.

Back to Contents


LAMBERT() fixes; M3UTILIO additions

January 3, 2006:

Subroutine LAMBERT() and its entries did not initialize ostensibly unused arguments to USGS routine GCTP(). Consequently, for compiler environments that initialize variables to NaN, internal GCTP() arithmetic (that is in principle unnecessary) on these array elements could lead to floating point exceptions. LAMBERT() now initializes the affected aray arguments with zeros.

MODULE M3UTILIO now has interface blocks for all 36 of the entries to LAMBERT().

Back to Contents


Support for Absoft Pro Fortran

November 29, 2005:

Support has been added for Absoft Pro Fortran for x86 and x86_64 Linux. Binary types are:
Linux2_x86af95
32-bit Linux with Absoft native linker-sumbol name-mangling (subroutine and function names are upcased; COMMON block names are prefixed with _C and then upcased)

Linux2_x86af95_
32-bit Linux with Intel/PGI/Lahey compatible linker symbols (subroutine, function, and COMMON block names are downcased and suffixed with a single underscore)

Linux2_x86af95dbg
32-bit Linux with Absoft native linker sumbols compiled for debug

Linux2_x86af95_dbg
32-bit Linux with Intel/PGI/Lahey compatible linker symbols, compiled for debug

Linux2_x86_64af95
64-bit (Opteron) Linux with Intel/PGI/Lahey compatible linker symbols

Linux2_x86_64af95_
64-bit Linux with Intel/PGI/Lahey compatible linker symbols

Linux2_x86_64af95dbg
64-bit Linux with Absoft native linker sumbols, compiled for debug

Linux2_x86_64af95_dbg
64-bit Linux with Intel/PGI/Lahey compatible linker symbols, compiled for debug

Back to Contents


Mac ioapi package from Alex Zubrow at the University of Chicago; assorted unused variables removed

November 11, 2005:

Alex writes:

Hi all.

If you want to use libioapi on a Mac, I've added the package to fink. For those who don't know fink, it is a package management system that automatically downloads and builds packages for you to work on a Mac. Through fink, you can easily install a whole series of useful scientific and graphics packages.

To get fink, go to:

http://fink.sourceforge.net/
You'll need to set it up to use the unstable branches of the distribution, see: http://fink.sourceforge.net/faq/usage-fink.php?phpLang=en#unstable Once you have fink working, you can get the ioapi package from the command line:
$ fink install ioapi

Or you can use the GUI FinkCommander.

I hope this is useful to folks out there.

Best,
Alexis

Makeinclude files are now available for the Absoft Fortran 90/95 compiler under Linux for x86 and x86_64 (64-bit mode on Opteron etc.):

Makeinclude.Linux2_x86_64af95 Makeinclude.Linux2_x86_64af95dbg Makeinclude.Linux2_x86af95 Makeinclude.Linux2_x86af95dbg
NOTE: Particular compile flags are needed for compatibility with the current netCDF configure-and-build system. These flags are also needed for compiling any model that links with the corresponing version of the I/O API.

Additionally, in a number of routines (READ4D, NAME2FID, LBLANK, GETNUM, OPEN3, MMDDYY, INITLOG3, INIT3, UNGRIDI, SETSPHERE, CHECK3, CBARNESN, CBARNES1, OPNLIST3, M3UTILIO, GETMENU, DDTVAR3 ) and m3tools programs (DIFFSTEP, VERTOT, BCSTEP, STATSPARS, LATLON, FAKESTEP, DAYAGG, AIRS2M3, AGMAX, M3CPLE, AGMASK, M3INTERP, M3COMBO, MTXCALC, MTXBUILD, MTXBLEND, M3TPROC, M3MERGE, AGGVARS, SELMRG2D, PRESTERP, MTXCPLE ), unused variables (as diagnosed by the Absoft f95) were eliminated.

Back to Contents

Dr. Michael Bane of the University of Manchester (UK)


Python ioapiTools package from Alex Zubrow at the University of Chicago; UNGRIDI;

October 31, 2005:

Alex Zubrow of the University of Chicago just announced release of a beta version of his ioapiTools. For those of you who didn't get a chance to hear his talk at the last CMAS conference, ioapiTools is a python interface to I/O API data. It allows you to easily import the data into python, have full access to the I/O API metadata, use the full breadth of python's scientific libraries, create plots, and write out your data to new I/O API or netCDF files. See:

http://www-pcmdi.llnl.gov/software-portal/Members/azubrow/ioapiTools/index_html

New subroutine UNGRIDI computes "incidence matrix ungridding" indices for grid-to-grid transformation from a grid to the set of target (e.g., point source) locations as specified above, i.e., so that for a variable V(NCOLS*NROWS) single-indexed on the source grid,

VNEW(S) = V(NX(S)) is the value at { <XLOC(S),YLOC(S)>

There was a trivial inconsistency in the trailing entry VERSN3 of /CSTATE3/ between ioapi/STATE3.EXT and ioapi/fixed_src/STATE3.EXT (which could easily be fixed by running make fixed_src. Thise COMMON-block entry is never referenced by any CMAQ code, and so this discrepancy should never have caused any difficulty. However, these are now fixed up to be consistent. That such a problem arises shows what a serious mistake it was for CMAQ to insist upon a nowhere-standard Fortran source format. Such failure to follow standards almost guarantees referential integrity problems such as this one.

Back to Contents


Bad M3TOOL starting time constraints

October 21, 2005:

The following programs had incorrect starting time constraints (in all cases, the starting time for program-run was incorrectly constrained to be at least as late as the starting time for the input file(s)).

M3COMBO
M3CPLE
M3INTERP
MTXBLEND
MTXCPLE
MTXCALC had an inappropriate assumption that the XCELL and YCELL for the input and output grids were always positive.

These programs are now fixed.

Back to Contents


XTRACT3(); web-pages

September 30, 2005, notes of appreciation:

Dr. Michael Bane of the University of Manchester (UK) pointed out an extraneous VNAME = VNAME in the code for XTRACT3(). This was left over from code unifications for I/O API Version 3, and would have appeared to be harmless, but seems to cause seg-faults on some architectures.

Dr. Joseph Vaughn of the Washington State University (Pullman, WA) pointed out errors in the documentation for NEXTIME(). This has now been fixed.

Back to Contents


F77 issue in GRDCHK3

August 4, 2005:

Alex Zubrow of the University of Chicago points out an issue in grdchk3.f: the string concatenation at line 162 is not permitted in strict Fortran-77, although it is legal in Fortran-90 (and is supported as an extension by most f77 compilers). This is now replaced by a modified format and arg-list that does pass strict Fortran-77 checking.

Back to Contents


Mods to PARMS3.EXT for WRF-Chem

July 27, 2005:

Two additional parameter tokens are added to INCLUDE-file PARMS3.EXT, for WRF vertical coordinate types, to support the on-going work to put the Models-3I/O API into WRF, and to create a WRF-Chem/SMOKE cooperating-model coupled system:

VGWRFEM=7
WRF mass-core sigma vertical coordinate type

VGWRFNM=8
WRF NMM vertical coordinate type

Back to Contents


m3tools program enhancements

July 6, 2005:

Many thanks to Dr. Michael Bane of the University of Manchester (UK) who has pointed out a number of problems with various cases in the the large-scale make system.

Back to Contents


m3tools program enhancements

June 22, 2005:

Smarter default values for user-entered NRECS are provided in the following programs. Primarily affected is the case when the input and output time steps are unequal.

Back to Contents


AIX Build Changes

June 17, 2005:

As pointed out by David Wong, US EPA, there were3 problems for AIX with preprocessor flags for the new build system and with program M3EDHDR. The flags are now special cased for AIX, and M3EDHDR now uses subroutine M3PROMPT to get around the flush() problems for AIX.

Back to Contents


Build Enhancements

June 10, 2005:

There are problems with the Fortran pre-processing for some versions of the Intel Fortran compilers; additionally, many Microsoft Windows build environments do not provide properly for Fortran pre-processing. These problems can to some extent alleviated by separating the preprocessing from the compile step for the *.F files. Makefile.cpphack are sample Makefiles in directories ioapiand m3tools for this purpose (as provided, they assume OpenMP and coupling mode).

Back to Contents


Bugfix in programs M3CPLE, M3INTERP, MTXBLEND, and MTXCPLE

June 2, 2005:

These programs had a bug in the prompt for starting time: they did not permit an STIME less than the starting time for the input file(s) even if the starting date was later than the input file starting date. This bug manifested itself, for example, if one had inputs starting at 2005153:120000 but wanted a program run starting at 2005154:000000. [One could have used the workaround of requesting a run starting at 2005153:360000... the I/O API time manipulation routines are quite robust in that regard.]

Back to Contents


Bugfix in NEXTIME() and CURREC()

May 25, 2005:

NEXTIME() had a bug with respect to normalizing JDATE = 0 arguments in all cases, not just the 0:0:0 case; moreover there were similar problems with CURREC().

Back to Contents


Bugfix in NEXTIME()

May 19, 2005:

NEXTIME() had a bug with respect to normalizing 0:0 = JDATE:JTIME arguments (recall that NEXTIME(JDATE,JTIME,0) may be used to normalize JDATE:JTIME so that JTIME is between 0 and 235959); this is now handled correctly.

This manifested itself in the creation of time-independent files (with SDATE3D = STIME3D = TSTEP3D = 0; the file header would record SDATE3D = -635. The I/O API would handle such files correctly, but it certainly "looks" bad...

Also minor enhancements to experimental MODULE M3UTILIO.

Back to Contents


Bugfix in ENVYN()

April 11, 2005:

DAVID Wong (US EPA) points out a bug in ENVYN() that occurs when the value is set to .TRUE. or .FALSE.. Now fixed.

Back to Contents


Makefile.nocpl issue: ddtvar3v.F and interp3v.F

April 6, 2005:

Files ddtvar3v.F and interp3v.F are active only when coupling mode is enabled (otherwise, the preprocessor strips their contents out, leaving empty results (which some compilers, e.g., Intel ifort Version 8.1, don't like...). These routines should not be in the FSRC list in Makefile.nocpl; that file has been revised accordingly.

Back to Contents


Bugfix for file header checking routine

April 4, 2005:

Dr. Michael Bane of the University of Manchester (UK) pointed out a bug in duplicate variable-name checking which had been put into file header checking in November (active when IOAPI_CHECK_HEADERS is turned on). This bug is now corrected.

Weakened architecture/optimization flags for binary type Linux2_x86_64 to get around a compiler bug, i.e., internal compiler errors in the gcc/g77 shipped with Fedora Core 3 for x86_64: the compiler has an internal "unable to find a register to spill..." error when attempting to compile certain routines. Note that this same compiler bug will bite you when trying to build lots of stuff on FC3/gcc/g77 systems, and the same fix seems to work universally.

Minor changes to Makefiles for better handling of the new experimental Fortran-90 MODULE M3UTILIO.

Following another suggestion from Dr. Bane, the command make gtar (used to create the distribution download tar-files) now creates a file VERSION.txt in the distribution root directory prior to creating the tar.gz file. VERSION.txt contains the result of running the system date command at the time make runs the gtar command.

Back to Contents


Build System Enhancements, Bugfix for CBARNES gridding routines

March 23, 2005:

There were troubles with floating point exceptions due to the interaction between round-off error and the exact-distance formula in the CBARNES Barnes analysis routines. The previous approximate-distance formula (which did not have this problem) has been put back in.

PathScake compiler support for AMD Opteron processors under Linux has been added.

Coupling mode support for GNU compiled libraries has been added (with a new treatment of GNU-style Fortran name mangling...)

Back to Contents


READ4D() change; new MODULE M3UTILIO

February 22, 2005:

Alex Zubrow of the University of Chicago points out that READ4D did not return a value for success.He also pointed out the duplicate potential definition of PERROR() in GETEFILE() and GETFFILE(). These are now corrected.

New file m3utilio.fcontains an experimental Fortran-90 alternative, MODULE M3UTILIO, to the INCLUDE files 'PARMS3.EXT, FDESC3.EXT, and IODECL3.EXT, as well as providing explicit INTERFACE blocks for most of the public I/O API routines (those for which argument-signature is not subject to variation).

Back to Contents


New "Edit FDESC3D" capability for program M3EDHDR

February 8, 2005:

The capability of editing the file description field FDESC3D was added to m3tools program M3EDHDR in order to compensate for systematic SMOKE Version 1.x and 2.x mis-design.

Back to Contents


Bug fix for worker routine m3abort()

February 1, 2005:

There was an error in worker routine m3abort() (called from OPEN3()) that would cause garbled error messages under some circumstances, when files could not be opened. Fixed.

Back to Contents


Bug fix for GCTP;
Format fix for envrealc() and envdblec()

January 18, 2005:

Catherine Seppannen of UNC-Carolina Environmental Program diagnosed an obscure bug that occurs in the GCTP map-projection package from USGS:

I've traced the problem to the subroutine SPHDZ0 in gctp.f. When GTPZ0 is first called, it calls SPHDZ0 with dummy values that cause the spheroid to be set to Clarke 1866. A later call to SPHDZ0 is made that looks like it should reset the spheroid. However, at line 5475, the subroutine checks if the spheroid needs to be set and then returns. This means that the spheriod is never changed from Clarke 1866. When processing UTM coordinates, the spheroid is changed outside of SPHDZ0 (at lines 1273 and 1274) so the correct spheroid is used in later calculations. For now, simply removing line 5475 and moving the label to the next line seems to solve the problem.

Dr. Michael Bane of the University of Manchester (UK) notes that there are problemswith underflow with the existing %f format used in envrealc() and envdblec(). This has now been changed to a more-robust %G,that should not be subject to underflow.

Back to Contents


Range checks for NVARS in OPEN3

December 9, 2004:

To facilitate user changes to parameter MXVARS3 in INCLUDE-file PARMS3,EXT, additional checks were inserted into OPEN3 and its worker routines to ensure that one may not inadvertently open files with NVARS too large for the current libioapi.a build.

Note that environments in which nonstandard values of parameters from PARMS3,EXT are used must be managed with great care: inconsistent values of these parameters for different objects or files within a build- or usage-scenario can lead to very hard to diagnose, obscure failures, and requesting help for such difficulties will still invoke the triple-time support penalties in the I/O API license.

Back to Contents


Fixes to M3TPROC

December 1, 2004:

Dr. Michael Bane of the University of Manchester, Manchester, UK, submits changes to program M3TPROC to allow clean compilation on the new Intel Version 8.1 compilers: removal of a duplicate declaration for ASTEPS, and reversion to F77 style declarations (instead of F90 style) for MENUITMS and OPNAMES.

Back to Contents


Duplicate declaration removed from STATE3.EXT; new experimental Fortran-90 MODULE M3UTILIO

November 30, 2004:

Dr. Michael Bane of the University of Manchester, Manchester, UK, noticed a duplicate declaration of variable VERSN3 in INCLUDE-file STATE3.EXT. This was clearly an error, and may have been responsible for cryptic error messages on various platforms. He also points out that Intel "ifort" Version 8 generates a "Command line warning: overriding '-auto' with '-save'" message during the compilation of GCTP; this latter message is not a symptom of an underlying problem (the build should still be correct.

MODULE M3UTILIO: Fortran-90 INTERFACE Blocks

There is a new experimental Fortran-90 module MODULE M3UTILIO, available, in file m3utilio.f, coming as a consequence of development work to enable the I/O API and SMOKE to couple with WRF-Chem. This module is not built by a default build (partly because of the lack of standards for naming module-files in the various Fortran 90/95 compilers), but may be built and used by the interested modeler. In addition to some cleaned-up utility routines used by SMOKE, it contains Fortran-90 INTERFACEs for most of the public I/O API utility routines (excepting those for which normal usage depends upon using an argument as a void pointer, i.e., in a non-typesafe manner (as in the sparse matrix multiplication routine SMATVEC,when used with an ALLOCATEd matrix-buffer filled from READ3). It also INCLUDEs the PARMS3.EXT, FDESC3.EXT, and IODECL3.EXT files, so that a single
USE M3UTILIO
replaces declarations of all the functions which have the INTERFACE blocks, as well as the inclusions:
INCLUDE 'PARMS3.EXT'
INCLUDE 'FDESC3.EXT'
INCLUDE 'IODECL3.EXT'
This greatly simplifies many I/O API applications.

I am thinking of splitting this module into two pieces, however: an INTERFACE block/declaration module (M3IO?), and a module for the SMOKE-related utility routines (MUTIL?); I welcome feedback on that matter (and in fact on the whole idea). -- CJC

SunOS SPARC 64-Bit? Opteron 32- and 64-bit? Others?

I would be interested in adding 64-bit compile-support for Sun SPARC and both 32-bit and 64-bit support for Sun Opteron systems. I no longer have access to the Sun compiler suite even for 32-bit SPARC, and would be glad to give credit for someone who would contribute the compile-flags to support these systems -- as well as whatever others you know how to build.-- CJC

Back to Contents


Enhancement for CHECK3()

November 22, 2004:

During the transition to I/O API Version 3, the responsibility for "timestep not available" status and for messages about that status was transferred from routines CHECK3 DDTVAR3 INTERP3 READ3 READ4D XTRACT3 to worker routine RDTFLAG. However, such messages should be generated for all of these routines except CHECK3, as was discovered during the implementation of the new WRF-enabled / sub-gridscale terrain version of the SMOKE TMPMOBIL program. Therefore, a new "verbose-output" flag was added to the argument list for RDTFLAG, and the other routines were modified accordingly.

Back to Contents


Bug fix, version in sample program VERTOT

November 19, 2004:

Bill Hutzell of EOA's Atmospheric Modeling Division, National Exposure Research Laboratory, pointed out a bug in sample program VERTOT, and provided the fix: when used to process all variables, the previous version of the program did not handle the list of output variable names (etc.) correctly.

Back to Contents


Bug fix, GCD() and RDTFLAG(); enhanced program M3TPROC

November 1, 2004:

There was a coding bug in routine GCD() and bugs in the error messages for worker-routine RDTFLAG(). These are now corrected.

Program M3TPROC was enhanced so that it will now do time aggregation of minima, in addition to the previously supported arithmetic means and maxima (so that one can now compute daily-minimum layer 1 temperature, for example). The time-stepping logic was enhanced to support partial-input aggregation, and the program control logic was completely overhauled to get rid of the absurdly complex hierarchy of environment variables and command-line prompts used in the prior version. Consequently, scripts used with the previous version will no longer work: the new version requires re-scripting.

Back to Contents


Bug fix, version in CRTFIL3()

October 15, 2004:

As pointed out by Dr. Michael Bane of the University of Manchester, Manchester, UK, worker routines CRTFIL3() and CRTKF3() were not correctly picking up the I/O API version to insert into file headers. This is now corrected.

Back to Contents


Bug fix, virtual mode INTEPR3()

September 7, 2004:

The virtual-mode part of the interp3() system still had a bug that occurred for PVM-based "virtual" files (netCDF file behavior is unaffected). This has now (finally!) been fixed and the fix validated.

Back to Contents


Bug fixes; program m3interp

September 3, 2004:

ungridb() had a fencepost error in dealing with the last row of the input grid, leading to errors when the output grid extended beyond that edge. Bug was reported by Catharine Sepannen, UNC CEP.

open3() now checks for repeated occurrences of variable names when opening files as "new" or "unknown", leading to more meaningful error messages than those which would otherwise come from netCDF.

The virtual-mode part of the interp3() system has been re-written to eliminate a bug which occurs forPVM-based "virtual" files (netCDF file behavior is unaffected).

New program m3interp is similar in capabilities to m3cple but in addition does time-interpolation to a potentially higher-resolution time step sequence. (This program has been moved from iotests directory to m3tools.)

Back to Contents


Bug fix in currstepc()

August 4, 2004:

currstepc() was wrong -- I found the bug during attempt to rationalize/re-engineer the structure of PAVE. The previous version would almost certainly have caused a seg-fault.

Back to Contents


Bug fix in M3COMBO

July 30, 2004:

M. Talat Odman of Georgia Tech points out a bug in M3COMBO: the first term in the linear combinations was wrong for multi-variable M3COMBO runs.

Back to Contents


Bug fixes in M3MSG2 and UNGRIDB

July 26, 2004:

Catherine Seppanen of UNC-CEP points out a bug in UNGRIDB: several clauses of the form

    ELSE IF ( C .GE. NCOLS - 1 ) THEN !  c right of grid
    
should instead be
    ELSE IF ( C .GT. NCOLS - 1 ) THEN !  c right of grid
    
The result of the bug was an inappropriate extend-by-constant computation for the last (N-S) column of the horizontal grid.

M3MESG and M3MSG2 had an argument-mismatch problem if they had to call worker routine INITLOG3 (which would occur if they were called prior to callingINIT3; this has been fixed.

Back to Contents


Message fix in MTXCALC

May 25, 2004:

Luca Delle Monache of the Atmospheric Science Programme at the University of British Columbia points out that the warning message for unsupported coordinate system types was incorrect in program MTXCALC. This is now fixed in the I/O API Version 3 download.

Back to Contents


I/O API Version 3.0 Pre-Release 2

May 17, 2004:

David Wong of SAIC characterized a bug in the BINFIL3 version of XTRACT3(), which is now fixed. There was also an over-dimensioning of the malloc()ed input buffer in that routine, now corrected.

Back to Contents


I/O API Version 3.0 Pre-Release 1

May 11, 2004:

I/O API Version 3.0 is now available for final user testing. Among its features are the following:

Documentation for I/O API Version 3 continues to be in preparation.

Back to Contents


New Makefiles for I/O API version 2.2; beta availability for I/O API version 3.

May 4, 2004:

In the retrofitting of M3PARAG, M3FLUSH, etc., into I/O API Version 2.2, I failed to update the Makefiles to match. This error has now been corrected for the new download tar-file.

The beta release of I/O API Version 3, as described below is now available for download.

Further documentation for I/O API Version 3 is in preparation.

Back to Contents


New subroutines M3PARAG, M3FLUSH

May 1, 2004:

New subroutine M3PARAG ("M3-paragraph") allows the caller to write multi-line messages (in a thread-safe manner) to the log.

New subroutine M3FLUSH allows the caller to flush a specified Fortran file to disk. This routine is useful for dealing with portability problems due to the fact that various operating system/Fortran compiler combinations define FLUSH inconsistently.

Subroutines M3MESG, M3WARN, M3EXIT, and M3ERR have been re-worked to enhance OpenMP thread-safety. (Actually, all of these except M3WARN, M3EXIT,and M3ERR are ENTRYs to the nified message-treatment now implemented in m3msg2.F.)

Back to Contents


New subroutine IOPARMS3

April 16, 2004:

New subroutine IOPARMS3 allows for run-time checks in model-level code, to check the I/O API dimensioning parameters from INCLUDE-file PARMS3.EXT being used to build the model match those used to build the libioapi.a being linked against. This is made the more necessary by the tendency of some among the SMOKE emissions modeling community to change dimensioning parameters in PARMS3.EXT and not simultaneously update the INCLUDE-files used for building SMOKE itself.

Back to Contents


Bug-fix to subroutines LAMBERT; enhancements to CKFILE3, and CKDESC3

March 30, 2004:

Eric Giroux of the National Research Council of Canada contributes a bug-fix and code enhancements made by his colleague Dazhong Yin:

Back to Contents


Bug-fix to M3STAT

December 2, 2003:

There were two problems with M3STAT: one serious, the other less so:

Back to Contents


GDTYP=STEGRD3 checking; Type-portability, I/O API Version 3

October 17, 2003:

Eric Giroux points out that the treatment in CKDESC() for map projection parameter PROJ_GAMMA for polar sterographic grids (GDTYP=STEGRD3) is incorrect: this parameter should have been ignored, instead of being checked against the range [-180,180]. Fixed in the new 2.2 release for Oct. 17.

David Wong points out that ENVREAL does not work correctly on the Cray T3E. A correct fix for this problem involves the use throughout of typedef FREAL and of type-casts back and forth between FREAL and float. Stopgap-fix in the new 2.2 release for Oct. 17; this will be treated more carefully in the upcoming I/O API Version 3 (below)

I/O API Version 3 is now under development. Among its features will be the following:

For more information, contact the author,
Carlie J. Coats, Jr.
carlie.coats@baronams.com

Back to Contents


Makeinclude.OSF1 enhancements

August 20, 2003:

Jinyou Liang, of the California Air Resources Board, suggests the following additions to Makeinclude.OSF1, for making the parallel version of the I/O API on Alpha OSF1 systems:

Add to FOPTFLAGS:
-arch host -tune host
Add to OMPFLAGS:
-omp
Add to OMPLIBS:
-omp

Back to Contents


Compiler-Bug Report: IRIX F90 Version 7.4

July 9, 2003:

Conditional-compilation for the I/O API now takes care of the fact that netCDF open-flag NF_SHARE is not implemented in netCDF for CRAYs. This affects only users who have more than one program simultaneously accessing the files. These users can still share files safely if both reader and writer processes declare the shared file to be "volatile".

In the process of doing the May 19 and June 5 bugfixes and enhancements, an OpenMP critical-section deadlock related to INIT3() was created in various routines. The critical sections related to INIT3() have now been re-organized in a cleaner, more consistent fashion, avoiding this deadlock. Affected routines are:

xtract3.f
write4d.F
write3.F
wrdict3.f
wratt3.f
sync3.f
snoop3.F
read3.F
read4d.F
read3.1.F
rdatt3.f
promptmfile.f
open3.F
m3warn.f
kfwrite.F
kfread.F
kfindx.f
interp3.F
inqatt3.f
getffile.F
getefile.F
getdfile.F
flush3.f
desc3.F
ddtvar3.F
ckgeom.f
check3.F
ll2utm.f
init3.F
m3abort.F

SGI IRIX F90 Version 7.4 does not follow industry-standard practice for ensuring that BLOCK DATA INITBLK3 is correctly linked in, to initialize I/O API internal data structures. Among other things, this causes problems with a user-setLOGFILE; for more details, look here. I have submitted this problem to SGI in an error report.
--CJC Note, Spring 2004: SGI contacted me about this, and have fixed it for the 7.4.1 and later compilers.

Back to Contents


Enhancements for IRIX F90

June 5, 2003:

When standard output is re-directed to a log file, SGI IRIX6 F90 Version 7.4 has anomalies in the way standard output is flushed to a file. Routines GETDBLE, GETMENU, GETNUM, GETREAL, GETSTR, M3MESG, M3MSG2, PROMPTDFILE, PROMPTFFILE, PROMTMFILE, PROMPTGRID have been enhanced to attempt to deal with these anomalies; additionally, new entry point M3FLUSH( INTEGER IUNIT ) for M3MSG2()has been added, for user-code to use for flushing its standard output, in order to similarly avoid these anomalies.

Back to Contents


Minor BugFixes/Enhancements for BUFFERED Files.

May 19, 2003:

There were errors in OPEN3(), XTRACT3(), and RDBUF3() dealing with the return data-types of worker routines when these routines were called on virtual files of type

BUFFERED. There was also a format-mismatch error in a warning message in OPNKF3() These were discovered, and fixes provided by David Wong, US EPA.

Back to Contents


Minor BugFixes/Enhancements

May 15, 2003:

The May 8, 2003 source-distribution tar-file was accidentally constructed using full path-names to specify the directories, rather than relative path names. This was corrected; moreover, make-target gtar was added to the Makefile so that the tar-file building process would be both correct and automated.

Function CRLF(), that had originated in SMOKE and that is used (afaik) only in that model, was modified so that it generates correct C-style line terminators for both UNIX and Windows (instead of only for Windows, as its predecessor did...) [UNIX traditionally uses the ASCII line-feed character as a line terminator; Windows uses a line-feed/carriage-return pair; Mac OS (not yet supported ;-( ) uses a carriage-return/line-feed pair.] Note that the insertion of C-style line terminators into the middle of Fortran strings for carriage control with Fortran I/O is not standard-conforming and in fact will not work on some systems (e.g., VMS, Crays).

Function XTRACT3() was modified to use time-step-check routine RDTFLAG() to bring it into conformity with the rest of the Version 2.2 I/O API input routines (which no longer have in-lined code for time step availability-checking, but use that routine instead).

Back to Contents


Enhancement to allow for OpenMP-parallel INTERP3() and/or KFOPEN() on files not yet opened
New make-target nametest checks linker-compatibility for libioapi.a and libnetcdf.a
New script nm_test.csh for testing linker-name compatibility.

May 8, 2003:

Enhancement allows for more relaxed/less careful model implementation, and removes the possibilities of deadlocks on opening multiple virtual files in parallel.

make nametest assumes that libioapi.a is built, and that libnetcdf.a has been correctly placed in ${OBJDIR}, and then checks that the compilers used to generate these two libraries use compatible name-mangling systems (e.g., the same number of trailing underscores, if any).

make all will run make nametest and report the results to the screen.

nm_test.csh <file1> <file2> <name> may be used to test that the compiler systems used to build file1 and file2 generate the same linker symbol name. Note that file1 and file2 should be object, executable, or archive (".a") files. For testing against libnetcdf.a, a good symbol is nf_open; for testing against libioapi.a, a good symbol is open3 (or possibly the all-caps versions of these names).

Back to Contents


Bugfix for SETTRM(); and new spheroid-selection routines SETSPHERE(), INITSPHERES(), and SPHEREDAT(). Apr. 14, 2003

April 14, 2003:

These routines allow the user to select a non-default sphere or spheroid for use with the I/O  wrappers (LAM2LL(), LL2UTM(), POL2TRM(), etc.) for GCTP(), either by means of environment variables or explicit subroutine calls.

Code for SETTERM() had an incorrect initializations for XCENT and YCENT; this would silently generate corrupt results.

Back to Contents


Bugfix for I/O API Version 2.2 rdatt3c(), wratt3c(), BUFINTX, and BUFINTXD: Feb. 18, 2003

These bugs were discovered by David Wong, US EPA.

Code for Cray versions of rdatt3c() and wratt3c() was incorrect (backwards test of whether the variable was of type CHARACTER or not, then incorrect Cray-specific treatment of file, variable, and attribute-names.

Code for BUFINTX and BUFINTXD had incorrect pointer-initializations; this would silently generate corrupt results.

Code for the Cray version of public routine SETENVVAR() and private routine lentrim() had syntax bugs, that are now fixed.

Back to Contents


Bugfix for I/O API Version 2.2 program M3TPROC: Feb. 7, 2003

This bug was found by Eric Giroux of the Institute for Chemical Process and Environmental Technology, National Research Council, Canada. He also aided in testing the solution as implemented.

Run-time memory allocation of internal work arrays was handled incorrectly when there were mixed output-lists of M3REAL and M3INT variables with M3DBLE variables. New code uses F90 "auto" work arrays, and completely avoids the problem.

Back to Contents


Bugfix for I/O API Version 2.2 program M3TPROC: Nov. 14, 2002

The previous edition would silently generate garbage for variables of type INTEGER or DOUBLE, or for files not of the types listed above. The new version handles all three types of variables correctly, and generates meaniangful error messages for the inappropriate file types. The new version is much cleaner in its coding, but for Fortran-90 only.

Back to Contents


Corrected handling of circular-buffer/RESTART files in READ3(), WRITE3(), INTERP3(), and DDTVAR3(): Aug. 29, 2002

There was an error in the handling of record numbers for I/O API circular-buffer (or "restart") files. This bug was discovered by Dr. Prakash Karamchandani at AER, who suggested the correct bug-fix as well.

(Circular-buffer files keep two time steps, the "even" and the "odd" time step; this allows the maintenance of what would otherwise be huge model-restart files without consuming excessive disk space. Negative values for time-step attribute TSTEP3D are used to indicate to OPEN3() that the requested file to be created is a circular-buffer file...)

Back to Contents


Bugfix in function ISDSTIME() and programs GREGDATE and JULDATE: July 9, 2002

There was an error in the Julian date for October 31, that caused ISDSTIME(), .GREGDATE and JULDATE to think that Daylight Savings Time ended on the last Sunday in September instead of the last Sunday in October. This error is now fixed.

Back to Contents


Bugfix in SETLAM(): June 7, 2002

There was an initialization problem in SETLAM() that caused irregular errors, particularly when called from C. This error is now fixed.

Back to Contents


Bugfix in SETENVVAR(): May 10, 2002

There was an off-by-one problem in SETENVVAR() that caused irregular errors in reading the resulting environment variables. This error is now fixed.

Back to Contents


Version 2.2: Due May 2002

The following set of enhancements does not break backward compatibility -- either at the source, link, or data levels. There is an additional round of enhancements planned for I/O API Version 3 to support the Weather Research and Forecasting Meteorology and Atmospheric Chemistry (WRF; WRF-CHEM) Models; this latter version (to appear 3rd quarter, 2002) will break source and link compatibility to some degree.
CMAQ Enhancements
Integration into the main development path of work by Jeff Young and David Wong at EPA ORD:
INTERPX
time-interpolation for a window into the grid defined by column, row, and layer subranges.

SETENV functionality
Allows the setting of environment variables from within model code. This will also wind up supporting NAMELISTs in the follow-on WRFIO implementation using I/O API Version 3

Support for T3E-style parallel I/O
Support for message-passing distributed-memory CMAQ on T3E/Fortran-90 (and similar platforms).

Minor Restructuring
There has been minor restructuring to improve the decoupling between the interface layer and the data storage/retrieval layer, in order more easily to support additional lower layer implementations (such as an MPI coupling mode).

tbd
...

Enhancements for the SMOKE emissions model
Support for input file-lists for READ3() and INTERP3():
setenv foo "LIST:name1,...,namen
setenv name1 <path>
...
setenv namen <path>
indicates that foo will be treated as a concatenation of files name1, ... namen for READ3() and INTERP3(). The files must have the same header structure, except for the time step structure, which must be compatible (identical time step, and all starting dates and times must be valid time steps for the time step sequence of the chronologically-earliest file). READ3() and INTERP3() take their data from the first listed file that has the relevant data (in case the files overlap).

This enhancement will also make it possible to get around the 2GB limits on input file sizes on various 32-bit platforms.

WRF Enhancements
Routines INQATT3(), RDATT3(), and WRATT3() support the specification of additional per-file and per-variable metadata attributes beyond the standard list, found in the FDESC COMMONs and accessed by the DESC3() routine.
Affects INCLUDE-files IODECL3.EXT and iodecl3.h.

The I/O routines has been re-coded so that it is only required that trimmed lengths (i.e., length exclusive of trailing blanks) of logical names and variable-names must not exceed NAMELEN3=16 (e.g, CHARACTER(LEN=24) FOO = 'v23456789012345   ' will be legal since its trimmed length is 15, it number of nonblank characters (which are then followed by 9 blanks to make out its total declared length of 24).

WRF eventually needs a number of additional enhancements that will break source, link, and backwards data compatibility with the current I/O API. These are being considered for an eventual I/O API Version 3, particularly:

F9x Enhancements

Global Climate I/O API Integration
The Global Climate I/O API is a variant of the I/O lAPI intended for use in global clmate modeling, where some modelers work in terms of a 360-day year having twelve months of exactly 30 days each. The library produced "lives" in a directory of its own, that has a _360 suffix (so is called io_360 e.g., Linux2_alpha_360 For Version 2.2 of the I/O API, we will unify the code of this version with the code for the main branch, so that one may obtain the io_360 by #defineing the preprocessor symbol IO_360 as in the Makefile.io_360 and using the usual build system.

LIST-variable Enhancements
Routines INTLIST(), REALIST(), and STRLIST() have been modified so that they accept an optional LIST: prefix for the value-list, so that one may set the list-value as in the following script-example for an INTLIST() list:
setenv MYLIST "LIST:1,24,9876,5"

Bug-fixes
LAMBERT() entries SET*() had a bug introduced when the extra map projections were added in Version 2.1.

Data type PROFIL3 had implementation errors which were corrected. (We finally had our first user of this data type, which was designed to store and retrieve rawinsonde profile data efficiently.)

I/O API Version 3 will support NAMELEN3=32 character variable and logical names, "staggered" variables, and various other things yet to be determined, in support of WRF. It will not be data- nor link-compatible (and may not be fully source-code compatible) with previous versions of the I/O API. We will maintain forwards data compatibility (so that Version 3 will read Version 1 and Version 2 generated files, but possibly not vice versa.

STATUS: under development. Version 2.2 is due out by the end of 2Q 2002; Version 3 should appear during 2Q 2003.

Back to Contents


bugfix in NEXTIME(): Jan. 15, 2002

It turns out that there was an algorithm error in subroutine NEXTIME() for the case of a negative time step that backed up the JDATE:JTIME argunments across a year boundary (e.g., stepping backwards by an hour from 2002001:003000 by -10000 should yield 2001366:233000 but did not get the year correct.

STATUS: fixed.

Back to Contents


I/O API Version 2.1: December 5, 2001

There were bugs in certain warning-output formats in routines CHKFIL3(), KFOPEN(), KFINDX(), OPNLOG3(), SHUT3(). These bugs arose during the effort to make all of the I/O API OpenMP thread-safe. LBLANK() also had an algorithm fix to make it safe for (F90) zero-length strings.

Intel Fortran and C, and Lahey-Fujitsu Fortran compilers for Linux are now supported by the Makeinclude system.

New routines INTLIST(), REALLIST(), and STRLIST() that read in comma-delimited-list-valued environment variables.

New programs for analysis, model-coupling, grid-to-grid transformation, etc.:

Back to Contents


Bug-fix in  CHECK3(), Makefile

There was a bug in certain warning-output formats in routine CHECK3(). This bug arose during the effort to make all of the I/O API OpenMP thread-safe.

There was also a bug in the way the Makefile was building GCTP(). The problem is that this is a very old Fortran routine from the US Geological Survey, which requires that compile-flags be set so as to SAVE all its local variables (and there turned out to be significant differences how various platforms handled the matter).

Back to Contents


More I/O API map projection support

Parameters have been added to INCLUDE file FDESC3.EXT for the following horizontal map projection types:
POLGRD3 = 6
Polar (secant) stereographic
EQMGRD3: = 7
Equatorial Mercator
TRMGRD3 = 8
Transverse Mercator
The implementation of map-transformations for these is provided directly by USGS routine GCTP. Support for these map projection types has been put into the user-friendly wrapper-module LAMBERT and into interactive map-transformation utility program UTMTOOL.

Back to Contents

New I/O API routine FILCHK3

New routines FILCHK3 (for Fortran) and filchk3c (for C) provide an easy check of whether an input-file's file-type and dimensions match the caller's expectations, with a report to the program log of any mis-matches that it finds. Typical Fortran use might be:
    ...
    IF ( .NOT.OPEN3( 'MYFILE', FSREAD3, 'Myprogram' ) ) THEN
C              MYFILE could not be opened for read-only
        ...
    ELSE IF ( .NOT. FILCHK3( 'MYFILE',
 &                       GRDDED3, NCOLS, NROWS, NLAYS, NTHIK ) THEN
C            Either the file type for 'MYFILE' was not GRIDDED, or
C            it had unexpected dimensions (see log for more details).
        ...
    END IF
    ...
    

Back to Contents


"Tools" Programs

In conjunction with various real-time numerical air quality prediction projects such as NAQP, a variety of new I/O API-related "Tools" programs have been developed:

Back to Contents


New Release Version

In cooperation with EPA, we will be releasing the new and updated public version 2.0 of the I/O API in late Fall, 1999. This version incorporates both the task-parallel and the coupling-mode extensions, as well as the time series operations.
The new version is now 2.0.0c, available here.

With this version, the source-code-level build-process uses Makefiles rather than the previous Makeit shell-scripts. This allows much faster re-building of the library for small bug-fixes.

With this version, we will be supporting only netCDF 3.x, because of the support it provides for synchronization during model coupling. Please note that the NCAR folks accidentally incorporated a link-incompatibility between versions 2.x and 3.x of netCDF in some of the "magic numbers" used to describe modes of opening files. Note also that versions 3.4 and later use different error numbers than version 3.3.1 and earlier. The I/O API Troubleshooting Page will be updated to reflect both sets of error numbers. (As of 8/20/1999, the current released version of netCDF is 3.4, although we have been testing the new version 3.5b2 in-house recently.)

Also with this version, the default build of the library will require linking with libpvm3.a for coupling mode support. PVM 3.4 or later is required, because of the requirement for PVM mailboxes.

For some vendors, linking of serial programs will also require the explicit specification of an OpenMP run-time library as well -- on SGI's, for example, this requires an additional -lmp in the linking-step command line for serial programs.

Back to Contents


OpenMP Task-Parallel Extensions

OpenMP is a recent standard for directive-based shared-memory parallel Fortran and C. The Fortran and C standards were released in October, 1997 and October, 1998, respectively; a revision of the Fortran standard is expected in October, 1999. Compilers supporting the OpenMP standard are available for a variety of platforms, including Compaq (DEC), HP, IBM, Linux (both x86 and Alpha), SGI, Sun, and Win32 (95, 98, and NT (both x86 and Alpha)). OpenMP supports not only the kind of loop-level parallelism that has long been available from a variety of vendors, but also task-parallelism as well. In addition to much better portability, it offers much better support (critical sections, barriers, nested parallelism) for large projects than did the proprietary vendor specific directives. We are using OpenMP Fortran in-house with various air quality modeling projects; with its MM5 meteorology model, NCAR is moving to OpenMP directives as of its MM5 Version 3.

We are making the I/O API thread-safe for OpenMP, and have been testing the result in various real-time air quality forecasting and other meteorological projects. The basic principle is that I/O API calls that read or write distinct variables and/or distinct files may be done concurrently from OpenMP programs. The biggest gains for model-users are with INTERP3 and DDTVAR3, where the call involves linear algebra computations (linear interpolation or differencing) in addition to I/O (which is performed sometimes--but not always, because of the internal double-buffering mechanisms. Note that I/O to/from disk is itself sequential in any case.)

Building a parallel program that uses an OpenMP-enabled libioapi.a generally requires compiler-specific parallelization directives in both the compile-lines and the link-lines that make your executable. For examples, ook at your machine/compiler's Makeinclude.${BIN} for variables OMPFLAGS andOMPLIBS used with this build of the library

Back to Contents


Data-Parallel Extensions

For message-passing data parallel programming, our colleagues at EPA's Atmospheric Research and Exposure Assessment Laboratory (AREAL) have been constructing an extension to the I/O API which distributes gridded data for domain-decomposition data parallel message passing models. Inquiries should be addressed to Dr. Jeffrey Young, yoj@hpcc.epa.gov.

As part of the Practical Parallel Project, MCNC has developed an HPF2 implementation of an HPF I/O API module which calls the I/O API and then re-destributes gridded or boundary data according to the data distribution of its caller. Unfortunately, however, the IBM XL HPF and Portland Group HPF compilers we use support only their own extensions to HPF 1.1 at this time, so we have had to develop revised HPF I/O API modules for each which are not fully general but which do fulfill the requirements of our HPF air quality and hydrology models.

Back to Contents


Parallel Extensions for Coupled Models

As part of the Practical Parallel Project, MCNC has developed an extended Model-Coupling Mode for the I/O API. This mode, based upon PVM 3.4 mailboxes, allows the user to specify in the run-script whether "file" means a physical file on disk or a PVM mailbox-based communications channel. In the latter case, the I/O API schedules the various processes in a coupled model on the basis of data availability: requests for data which has not yet been written put the reading process to sleep until the data arrives, at which point the reader is awakened and given the data it requested. The one requirement is that the programmers structure reads and writes so as to avoid deadlocks (two or more models, each asleep while waiting for input from the other).

This has several advantages from the model-engineering point of view:

Back to Contents


Time Series READ/WRITE

In order to support the needs of surface-water, lake and estuary, and bay modeling, at the request of EPA-AREAL we have added two routines to the I/O API which will access an entire time step sequence of data in a single operation ("read or write N time steps of data starting at date and time D:T with step DT for variable V to/from file F"). The new routines are READ4D() and WRITE4D(), and very much resemble READ3() and WRITE3(), except for the specification of an entire time step sequence as arguments, the restriction to single-variable operations (ALLVAR3 is not supported for these) and file types CUSTOM3, GRDDED3, BNDARY3, and TSRIES3.

Back to Contents


Additional Supported Platforms

Conditional compilation directives in the I/O API were recently modified to make it easier to port the I/O API to other platforms. Three issues are prominent: Preprocessor definitions and conditional compilation directives recognizing them have been provided in the code: defining FLDMN=0,1 specifies the first; REAL8=0,1 specifies the second, and AUTO_ARRAYS=0,1 the last of these. Work is in progress to provide the I/O API on at least the following additional platforms:

Back to Contents


MCPL: an I/O API output module for MM5

MCPL is an I/O API output module for MM5 developed under the MCNC PPAR project. It is MCPL is designed to fit into MM5 with a minimum of effort, to offer great flexibility of run-time configuration, and to be written in "boring" code that is easy to understand, extend, and maintain. It generates output files with a variety of kinds of variables:

Back to Contents


Go to the I/O API Home Page

Go to the I/O API Availability/Download page

Go to the I/O API Home Page

Go to the I/O API User Manual

Send comments to

Carlie J. Coats, Jr.
carlie.coats@baronams.com

    $Id: NEWSTUFF.html 108 2018-09-07 18:59:37Z coats $