AVGSPD_SCCXREF: Reference SCC input file for average speed distribution profilesCFPRO: Mobile source control factor input fileMCXREF: Mobile representative county cross-reference fileMEPROC: List of mobile emission processes and associated activities and pollutantsMFMREF: Mobile fuel month file for MOVESMRCLIST: List of MOVES Lookup TablesSPDIST: Mobile average speed distribution profile input fileSPDPRO: Mobile hourly speed profile input fileThis file provides mapping between reference SCC (i.e., SCC8) and full SCC (i.e., SCC10) for Movesmrg to convert reference SCC-level inventory to full SCC inventory. Although it shares the same format of Table 8.99, “Delimited format for SCCXREF”, this input file is designed for RatePerDistance (RPD) mode run in Movesmrg for users to allow to map aggregated SCC-level averaged speed (AVGSPD) distribution profiles to full SCCs in RPD mode run:
Table 8.61. Delimited format for AVGSPD_SCCXREF
| Lines | Position | Description |
|---|---|---|
| 1+ | A | Full SCC (20-character maximum string) |
| B | Reference SCC (20-character maximum string) |
Example 8.1. AVGSPD_SCCXREF example file
Full_scc,Reference_scc 2201110262,2200110200 2201110362,2200110300 2201110462,2200110400 2201110562,2200110500 2201210262,2200210200 2201210362,2200210300 2201210462,2200210400 2201210562,2200210500 2201310262,2200310200 2201310362,2200310300 2201310462,2200310400 2201310562,2200310500 2201320262,2200320200 ....
The CFPRO file is used to allow the user to apply factors to Movesmrg to control hourly emission rates from all MOVES lookup tables (i.e., RatePerDistance, RatePerVehicle, RatePerHour, and RatePerProfile).
Its format is shown in Table 8.62, “Format for CFPRO”.
A many-step hierarchy is used in applying the control factor cross-referencing. SMOKE preferentially matches each source to the most specific match in the file. The maximum field width in SMOKE and its input files for SCC is 20 characters as of SMOKE v4.0. The 8 or 10 digit SCC are still supported, but if the SCC is greater than 10 digits the SCC hierarchial approach will not be supported.
Country/state/county code, 10-digit SCC, month, and pollutant
Country/state/county code, 10-digit SCC, and month
Country/state/county code, 10-digit SCC, and pollutant
Country/state/county code, and 10-digit SCC
Country/state code, 10-digit SCC, month, and pollutant
Country/state code, 10-digit SCC, and month
Country/state code, 10-digit SCC, and pollutant
Country/state code, and 10-digit SCC
10-digit SCC, month, and pollutant
10-digit SCC, and month
10-digit SCC, and pollutant
10-digit SCC
Country/state/county code, month, and pollutant
Country/state/county code, and month
Country/state/county code, and pollutant
Country/state/county code
Country/state code, month, and pollutant
Country/statecode, and month
Country/state code, and pollutant
Country/state code
Ultimate default (no pollutant, no month, country/state/county code = 0, SCC = 0)
Table 8.62. Format for CFPRO
| Column | Name | Type | Description |
|---|---|---|---|
| A | FIPS | Char(5) | FIPS code for state and county code |
| B | SCC | Char(20) | Source Category Code (SCC) |
| C | POL | Char(16) | Pollutant Code |
| D | Month | Integer | Processing month (Jan=1, Feb=2, and so on) |
| E | Control Factor | Real | Factor set by user to control hourly emission rates |
The MCXREF file is a list-directed file used to assign representative counties to inventory counties. Its format is shown in Table 8.63, “Format for MCXREF”.
Table 8.63. Format for MCXREF
| Line | Position | Description |
|---|---|---|
| 1+ | A | One-digit country FIPS code for inventory county (Character) |
| B | Two-digit state FIPS code for inventory county (Character) | |
| C | Three-digit county FIPS code for inventory county (Character) | |
| D | One-digit country FIPS code for representative county (Character) | |
| E | Two-digit state FIPS code for representative county (Character) | |
| F | Three-digit county FIPS code for representative county (Character) |
The MEPROC file, used by Spcmat lists the pollutants that will be generated by MOVES for modeling on-roadway and off-network mobile sources. The available
emission processes are listed in Section 2.8.4.9, “ MOVES Emission Processes by Emission Rate Tables”. The format of the MEPROC file is shown in Table 8.64, “Format for MEPROC”.
Table 8.64. Format for MEPROC
| Line | Position | Description |
|---|---|---|
| 1+ | A | Activity name (Character) |
| C | Associated pollutant name(s) for activity and process combination (Character) |
The MFMREF file specifies reference fuel months to assign to calendar months being simulated for each representative county. The file
specifies the representative month where the fuel formulation mix is representative for other months. The file serves the
purpose of grouping months of the year by fuel parameters. The format of the MFMREF file shown in Table 8.65, “Format for MFMREF”.
The MRCLIST file is an input file for Movesmrg that contains the list of MOVES-based lookup tables from the MOVES processing script associated with representative county
and fuel month. The format of the MRCLIST file is shown in Table 8.66, “Format for MRCLIST”.
Table 8.66. Format for MRCLIST
| Line | Position | Description |
|---|---|---|
| 1+ | A | FIPS code (Char(5)) |
| B | Fuel Month (Inetger) | |
| C+ | Associated MOVES-based lookup table filename (Character) |
Example 8.7. MRCLIST example file for Movesmrg (MOVES RPD lookup table)
13121 4 rateperdistance_13121_apr.txt 13121 7 rateperdistance_13121_jul.txt
The SPDIST file is used to provide weekend/weekday and hour-specific average 16-speed bins distribution profile data to Movesmrg to estimate hourly emission rates from RatePerDistance (RPD) lookup table. It's format is shown in Table 8.67, “Format for SPDIST”.
Table 8.67. Format for SPDIST
| Column | Name | Type | Description |
|---|---|---|---|
| 1 | FIPS | Char(5) | FIPS code for state and county code |
| 2 | SCC | Char(20) | Source Category Code (SCC) |
| 3 | Day of week | Integer | "Weekday = 5, Weekend = 2" |
| 4 | Hour of day | Integer | "Hour of day (1,,,,24)" |
| 5 | Speed Bin #1 | Real | Average speed distribution factor for speed bin 1 |
| 6 | Speed Bin #2 | Real | Average speed distribution factor for speed bin 2 |
| ... | ... | ... | ... |
| 19 | Speed Bin #15 | Real | Average speed distribution factor for speed bin 15 |
| 20 | Speed Bin #16 | Real | Average speed distribution factor for speed bin 16 |
Example 8.10. SPDPRO file
#FIPS,SCC,dayID,hourID,spdbin1,spdbin2,,,,,,,,,,,,,spdbin15,spdbin16 1001,2201110200,2,1,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.06,0.22,0.11,0.61 1001,2201110200,2,2,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.54,0.46 1001,2201110200,2,3,0.00,0.00,0.00,0.00,0.00,0.01,0.00,0.00,0.00,0.00,0.04,0.00,0.02,0.02,0.48,0.43 1001,2201110200,2,4,0.00,0.00,0.01,0.01,0.01,0.01,0.02,0.01,0.01,0.00,0.01,0.01,0.02,0.39,0.20,0.29 1001,2201110200,2,5,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.02,0.04,0.94 ... 1001,2201110200,2,20,0.02,0.12,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.02,0.02,0.09,0.13,0.60 1001,2201110200,2,21,0.00,0.08,0.04,0.01,0.00,0.00,0.02,0.00,0.00,0.00,0.03,0.00,0.08,0.06,0.28,0.39 1001,2201110200,2,22,0.00,0.00,0.04,0.00,0.01,0.01,0.03,0.00,0.06,0.00,0.02,0.01,0.10,0.08,0.18,0.49 1001,2201110200,2,23,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.04,0.07,0.00,0.04,0.23,0.62 1001,2201110200,2,24,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.02,0.03,0.08,0.21,0.65
The SPDPRO file is used to provide weekend/weekday hourly speed profile data to Movesmrg to estimate hourly emission rates from RatePerDistance lookup table. It's format is shown in Table 8.68, “Format for SPDPRO”.
Table 8.68. Format for SPDPRO
| Column | Name | Type | Description |
|---|---|---|---|
| 1 | FIPS | Char(5) | FIPS code for state and county code |
| 2 | SCC | Char(20) | Source Category Code (SCC) |
| 3 | Weekday | Char(7) | "WEEKDAY" |
| 4 | Hour 1 | Real | Weekday hourly average speed (mile per hour) in local hour 1 |
| 5 | Hour 2 | Real | Weekday hourly average speed (mile per hour) in local hour 2 |
| ... | ... | ... | ... |
| 27 | Hour 24 | Real | Weekday hourly average speed (mile per hour) in local hour 24 |
| 28 | Weekend | Char(7) | "WEEKEND" |
| 29 | Hour 1 | Real | Weekend hourly average speed (mile per hour) in local hour 1 |
| 30 | Hour 2 | Real | Weekend hourly average speed (mile per hour) in local hour 2 |
| ... | ... | ... | ... |
| 52 | Hour 24 | Real | Weekend hourly average speed (mile per hour) in local hour 24 |
The Run Control file (a.k.a Control.in) is used to specify the calendar year, pollutants, and day type (weekday or weekend);
and the Met4moves output temperature file for the batch run of MOVES. Its format is shown in Table 8.69, “Format for Control.in”.
Table 8.69. Format for Control.in
| Variable | Description |
|---|---|
| DBHOST | Database Hostname |
| MOVESHOME | Full pathname of MOVES installation directory |
| BATCHRUN | Character string that is the name for the MOVES batch files |
| OUTDIR | Full pathname where all output files will be written; batch files, MOVES runspec files, MOVES data importer files |
| MODELYEAR | Episode modeling year |
| POLLUTANTS | One or more keywords: PM, OZONE, TOXICS, GHG |
| DAYOFWEEK | Keywords WEEKDAY and/or WEEKEND. Optional input. If not specified, then both weekday and weekend estimates will be generated |
| METFILE | Full pathname of input meterological data (output from Met4moves processor). |
Example 8.12. Control.in file
DBHOST = localhost MOVESHOME = /netscr/MOVES2010 BATCHRUN = GEORGIA OUTDIR = /netscr/MOVES2010/runspec_files/georgia MODELYEAR = 2005 POLLUTANTS = ozone DAYOFWEEK = WEEKDAY, WEEKEND METFILE = /netscr/MOVESDATA/georgia/2005/2005_refcounty_MOVES_RH_OUTFILE.txt RPMETFILE = /netscr/MOVESDATA/georgia/2005/2005_refcounty_MOVES_OUTFILE.txt
The Representative County file (a.k.a Countyrep.in) is used to specify the list of representative counties as separate REPCOUNTY
packets, as shown below. Each representative county needs entries for the FIPS field and the full path and file names for
csv files containing the MOVES data for AGE, IM, FUELSUPPLY, POP, Highway Performance Monitoring System (HPMS) and Vehicle
Miles Travelled (VMT), and FUELFORM (optional). Every county specified in the Met4moves output file must be specified in the
representative county file or an error will occur. The format is shown in Table 8.70, “Format for Countyrep.in”.
Table 8.70. Format for Countyrep.in
| Variable | Description |
|---|---|
| FIPS | FIPS code for representative county (Char(5)) |
| AGE | Full filename and pathname for age distribution csv file |
| IM | Full filename and pathname for the im coverage csv file |
| FUELSUPPLY | Full pathname and filename for the fuel supply csv file |
| POP | Full pathname and filename for the population csv file |
| HPMSVMT | Full pathname and filename for the HPMS Road Type and VMT csv file |
| FUELFORM (optional) | Full pathname and filename for the HPMS Road Type and VMT csv file |
Example 8.13. countyrep.in file
<REPCOUNTY> FIPS =13121 AGE =/netscr/MOVES2010/runspec_files/georgia/agedistribution_13121.csv IM =/netscr/MOVES2010/runspec_files/georgia/imcoverage_13121.csv FUELSUPPLY =/netscr/MOVES2010/runspec_files/georgia/fuelsupply_13121.csv POP =/netscr/MOVES2010/runspec_files/georgia/population_13121.csv HPMSVMT =/netscr/MOVES2010/runspec_files/georgia/hpmsvtypeyear_13121.csv FUELFOR M = <ENDREPCOUNTY> <REPCOUNTY> FIPS =13127 AGE =/netscr/MOVES2010/runspec_files/georgia/agedistribution_13127.csv IM =/netscr/MOVES2010/runspec_files/georgia/imcoverage_13127.csv FUELSUPPLY =/netscr/MOVES2010/runspec_files/georgia/fuelsupply_13127.csv POP =/netscr/MOVES2010/runspec_files/georgia/population_13127.csv HPMSVMT =/netscr/MOVES2010/runspec_files/georgia/hpmsvtypeyear_13127.csv FUELFOR M = <ENDREPCOUNTY>
The Age Distribution file for each representative county shows the sourceTypeID, yearID, ageID, and ageFraction for the vehicles
in each representative county. The format is shown in Table 8.71, “Format for agedistribution_referencecounty.csv”.
Table 8.71. Format for agedistribution_referencecounty.csv
| Variable | Description |
|---|---|
| sourceTypeID | two-digit sourceTypeID for representative county (Integer) |
| yearID | four-digit year IDs |
| ageID | two-digit ageIDs |
| ageFraction | fraction of the vehicle population that is associated with the ageID for a specified year and sourceTypeID |
Example 8.14. agedistribution_13121.csv file
sourceTypeID, yearID, ageID, ageFraction 11,2009,0,0.032258065 11,2009,1,0.032258065 11,2009,2,0.032258065 11,2009,3,0.032258065 11,2009,4,0.032258065 11,2009,5,0.032258065 11,2009,6,0.032258065 11,2009,7,0.032258065 11,2009,8,0.032258065 11,2009,9,0.032258065 11,2009,10,0.032258065 11,2009,11,0.032258065 11,2009,12,0.032258065 11,2009,13,0.032258065 11,2009,14,0.032258065 11,2009,15,0.032258065 11,2009,16,0.032258065 11,2009,17,0.032258065 11,2009,18,0.032258065 11,2009,19,0.032258065 11,2009,20,0.032258065 11,2009,21,0.032258065 11,2009,22,0.032258065 11,2009,23,0.032258065 11,2009,24,0.032258065 11,2009,25,0.032258065 11,2009,26,0.032258065 11,2009,27,0.032258065 11,2009,28,0.032258065 11,2009,29,0.032258065 11,2009,30,0.032258065 .....
The Fuel Supply file is a list directed file used to define the fuel supply and the months that the fuels are used for each
representative counties. Its format is shown in Table 8.72, “Format for FuelSupply.csv”.
Table 8.72. Format for FuelSupply.csv
| Variable | Description |
|---|---|
| countyID | Country FIPS code for representative county (Char(5)) |
| fuelYearID | Four-digit fuel year ID for representative county (Integer) |
| monthGroupID | One-digit month group ID for representative county (Integer) |
| fuelFormulationID | Four to Five digit fuel formulation ID for representative county (Integer) |
| marketShare | decimal fraction of marketShare for the fuel/month for the representative county |
| marketShareCV | decimal fraction (.5)? |
Example 8.15. fuelsupply_13121.csv example file
"countyID","fuelYearID","monthGroupID","fuelFormulationID","marketShare","marketShareCV"^M 13121,2009,1,8124,0.428571,0.5 13121,2009,1,2722,0.571429,0.5 13121,2009,1,20043,1.0,0.5 13121,2009,4,8136,0.428571,0.5 13121,2009,4,2734,0.571429,0.5 13121,2009,4,20043,1.0,0.5
The Fuel Formulation file is a list directed file used to specify a new fuelFormulation ID if a local fuel does not match
the list of nearly 9,000 predefined fuels in MOVES. Its format is shown in Table 8.72, “Format for FuelSupply.csv”.
Table 8.73. Format for FuelFormulation.csv
| Variable | Description |
|---|---|
| FuelFormulationID | Four to Five digit fuel formulation ID for representative county (Integer) |
| fuelSubtypeID | Four-digit fuel Subtype ID (Integer) |
| RVP | ?-digit (Integer) |
| sulfurLevel | (Integer) |
| ETOHVolume | |
| MTBEVolume | |
| ETBEVolume | |
| TAMEVolume | |
| aromaticContent | |
| olefinContent | |
| benzeneContent | |
| e200 | |
| e300 | |
| bioDieselEsterVolume | |
| acetaneIndex | |
| PAHContent |
The HPMSV file is a list directed file used to define the annual VMT by Highway Performance Monitoring System (HPMS) vehicle
type. Its format is shown in Table 8.74, “Format for HPMSVtypeyear_countyrep.csv”.
The IM Coverage file is a list directed file used to define the inspection and maintanance data available for each representative
counties. Its format is shown in Table 8.75, “Format for imcoverage_referencecountyID.csv”.
Table 8.75. Format for imcoverage_referencecountyID.csv
| Variable | Description |
|---|---|
| polProcessID | Three-digit pol process in the representative county (Integer) |
| stateID | Two-digit state ID in the representative county (Integer) |
| countyID | Five-digit county ID for the representative county (Integer) |
| yearID | Four-digit year ID for representative county (Integer) |
| sourceTypeID | Two-digit source type ID for the representative county |
| fuelTypeID | One-digit fuel type ID |
| IMProgramID | One or two-digit inspection and maintance program ID for representative county (Integer) |
| inspectFreq | One-digit inspection frequency ID for the representative county |
| testStandardsID | Two-digit test standards ID for the representative county |
| begModelYearID | Four-digit beginning model year ID |
| endModelYearID | Four to Five digit fuel formulation ID for representative county (Integer) |
| useIMyn | Y - "does use I/M program", N - "does not use I/M program" |
| complianceFactor | decimal percentage compliance factor |
Example 8.18. imcoverage_13121.csv example file
polProcessID,stateID,countyID,yearID,sourceTypeID,fuelTypeID,IMProgramID,inspectFreq,testStandardsID,begModelYearID,endModelYearID,useIMyn,complianceFactor 113,13,13121,2009,31,1,8,1,43,1996,2005,Y,97 113,13,13121,2009,31,1,7,1,41,1975,1995,Y,97 113,13,13121,2009,21,1,8,1,43,1996,2005,Y,97 113,13,13121,2009,21,1,7,1,41,1975,1995,Y,97 301,13,13121,2009,31,1,10,1,51,1996,2005,Y,94.09 301,13,13121,2009,31,1,4,1,24,1975,1995,Y,94.09 301,13,13121,2009,21,1,10,1,51,1996,2005,Y,94.09 301,13,13121,2009,21,1,4,1,24,1975,1995,Y,94.09 .....
The MOVES Population by source type file contains the year, source and population for each representative county. Its format
is shown in Table 8.76, “Format for population_13217.csv”.
The Dummy Average Speed Distribution file is a file that contains the average speed bin ID and average speed fraction for
each representative counties. Its format is shown in Table 8.77, “Format for dummyavgspeeddistribution.csv”.
Table 8.77. Format for dummyavgspeeddistribution.csv
| Variable | Description |
|---|---|
| sourceTypeID | Two-digit source type ID (Integer) |
| roadTypeID | one-digit road type ID (Integer) |
| hourDayID | Two-digit hour day ID (Integer) |
| avgSpeedBinID | average speed bin ID (Integer) |
| avgSpeedFraction | decimal fraction representing the proportion of vechicles that travel at within each of the speed bins for a specific road typeID and hourDayID for the representative county |
Example 8.20. dummy_avgspeeddistribution.csv example file
sourceTypeID,roadTypeID,hourDayID,avgSpeedBinID,avgSpeedFraction 11,2,12,1,0 11,2,12,2,0 11,2,12,3,0 11,2,12,4,0 11,2,12,5,0 11,2,12,6,0 11,2,12,7,0 11,2,12,8,0 11,2,12,9,0 11,2,12,10,0 11,2,12,11,0 11,2,12,12,0.0091073 11,2,12,13,0.0285067 11,2,12,14,0.0988925 11,2,12,15,0.248298 11,2,12,16,0.615196 ..
The Dummy Day VMT Fraction file is a file that contains specifies whether the VMT are weekday or weekend. Its format is shown
in Table 8.78, “Format for dummydayvmtfraction.csv”.
Table 8.78. Format for dummydayvmtfraction.csv
| Variable | Description |
|---|---|
| sourceTypeID | Two-digit source type ID (Integer) |
| monthID | one or two-digit month ID (Integer) |
| roadTypeID | one digit road type ID (Integer) |
| dayID | 2 - weekday, 5 - weekend |
| dayVMTFraction | decimal fraction representing the proportion of vehicle miles traveled for the weekday or weekend day type |
Example 8.21. dummy_roadtypedistribution.csv example file
sourceTypeID,monthID,roadTypeID,dayID,dayVMTFraction 11,7,1,2,0.237635 11,7,1,5,0.762365 11,7,2,2,0.27882 11,7,2,5,0.72118 11,7,3,2,0.27882 11,7,3,5,0.72118 11,7,4,2,0.237635 11,7,4,5,0.762365 11,7,5,2,0.237635 11,7,5,5,0.762365 21,7,1,2,0.237635 21,7,1,5,0.762365 21,7,2,2,0.27882 21,7,2,5,0.72118 21,7,3,2,0.27882 21,7,3,5,0.72118 21,7,4,2,0.237635 21,7,4,5,0.762365 21,7,5,2,0.237635 21,7,5,5,0.762365 ..
The Dummy Hour VMT Fraction file is a file that contains specifies the VMT fraction associated with each hour of the day.
Its format is shown in Table 8.79, “Format for dummyhourvmtfraction.csv”.
Table 8.79. Format for dummyhourvmtfraction.csv
| Variable | Description |
|---|---|
| sourceTypeID | Two-digit source type ID (Integer) |
| roadTypeID | one digit road type ID (Integer) |
| dayID | one digit day type ID (Integer), 2 - weekday, 5 - weekend |
| hourID | 1-24 hours |
| hourVMTFraction | decimal fraction representing the proportion of vehicle miles traveled are associated with a particular hour of the day for each source type, road type and day type (weekday or weekend) |
Example 8.22. dummy_hourvmtfraction.csv example file
sourceTypeID,roadTypeID,dayID,hourID,hourVMTFraction 11,1,2,1,0.0214739 11,1,2,2,0.0144428 11,1,2,3,0.0109684 11,1,2,4,0.00749451 11,1,2,5,0.00683855 11,1,2,6,0.0103588 11,1,2,7,0.0184304 11,1,2,8,0.0268117 11,1,2,9,0.0363852 11,1,2,10,0.0475407 11,1,2,11,0.0574664 11,1,2,12,0.0650786 11,1,2,13,0.0713228 11,1,2,14,0.0714917 11,1,2,15,0.0717226 11,1,2,16,0.0720061 11,1,2,17,0.0711487 11,1,2,18,0.0678874 11,1,2,19,0.0617718 11,1,2,20,0.0516882 11,1,2,21,0.0428658 11,1,2,22,0.0380302 11,1,2,23,0.0322072 11,1,2,24,0.0245677 ..
The Dummy Month VMT Fraction file is a file that contains specifies the VMT fraction associated with each hour of the day.
Its format is shown in Table 8.80, “Format for dummymonthvmtfraction.csv”.
Table 8.80. Format for dummymonthvmtfraction.csv
| Variable | Description |
|---|---|
| sourceTypeID | Two-digit source type ID (Integer) |
| isLeapYear | Y or N |
| monthID | one digit day type ID (Integer), 2 - weekday, 5 - weekend |
| monthVMTFraction | decimal fraction representing the proportion of vehicle miles traveled are associated with a specific month for each source type. |
Example 8.23. dummy_monthvmtfraction.csv example file
sourceTypeID,isLeapYear,monthID,monthVMTFraction 11,N,1,0.083333333 11,N,2,0.083333333 11,N,3,0.083333333 11,N,4,0.083333333 11,N,5,0.083333333 11,N,6,0.083333333 11,N,7,0.083333333 11,N,8,0.083333333 11,N,9,0.083333333 11,N,10,0.083333333 11,N,11,0.083333333 11,N,12,0.083333333 21,N,1,0.083333333 21,N,2,0.083333333 21,N,3,0.083333333 21,N,4,0.083333333 21,N,5,0.083333333 21,N,6,0.083333333 21,N,7,0.083333333 21,N,8,0.083333333 21,N,9,0.083333333 21,N,10,0.083333333 21,N,11,0.083333333 21,N,12,0.083333333 ..
The Road Type Distribution file is a file that contains the average speed bin ID and average speed fraction. Its format is
shown in Table 8.81, “Format for dummyroadtypedistribution.csv”.